InfoPrint continuous form printers
  3000 Introduction and planning tasks
    About This Publication
    Terms
    Infoprint 3000 Library
    Related Publications
    Summary of Changes
    Introduction
      Printer Characteristics
      Infoprint 3000 Printer and Form Specifications
        Printer Specifications
        Form Specifications
      Simplex Printers
        Components
        Printing Methods
      Duplex Systems
        Components
        Duplex System Printing Methods
      Configuration for a Simplex Printing System
      Inline Configuration for a Duplex Printing System
      Left Angle Configuration for a Duplex Printing System
      Left Angle Configuration for a Dual Simplex Printing System
      'h' Configuration for a Duplex Printing System
      Basic Page-Printing Concepts
        Combining Text with Images
        Orienting Text and Images on a Page
        Advanced Function Image and Graphics
        Multiple-Up Printing
        Using Stored Information
      Optional Features
        Mark Perforations on Perfless Paper
        Move Mark Forms
    The Advanced Function Printers Characteristics
      Printing Speed
      AFCCU Processor Performance Options
      Print Material
      Print Quality
      Print Quality Enhancement
      Printer Resolution
        480/600 Switchable Printers
        IPDS Resolution Acceptance (600 DPI Resolution Only)
        Font Enhancement Mode
        AFP Resource Resolution
      Print Area
      Control Unit Processor Memory
      Display Touch Screen
      Power Control
        Simplex Models
        Duplex Models
      Software Requirements
        IPDS
        Application Environment
      Host System Attachment Choices
        System/370 Channel Attachment
        Enterprise Systems Connection (ESCON) Channel Attachment
        Local Area Network (LAN) Attachments
        FDDI Attachment
      Preprocessing and Postprocessing Device Interfaces (Optional)
      Reliability, Availability, and Serviceability
      Data Security
      Resident Fonts
    Organizing the Planning Team
      Planning Coordinator
      Physical Planner
      System and Application Programmers
      Operator
      Implementation Plan
        Fifteen Weeks before Delivery
        Ten Weeks before Delivery
        Eight Weeks before Delivery
        Six Weeks before Delivery
        Four Weeks before Delivery
        Arrival of the Printer
    Preparing the Processing Environment
      Channel and Local Area Network Attachments
        System/370 Channel Attachment
        ESCON Channel Attachment
        ESCON Multiple-Host Environment
        Token Ring TCP/IP Local Area Network
        Ethernet TCP/IP Local Area Network
        FDDI Local Area Network
        Performance Considerations
      Direct-Attach
      Advanced Function Presentation Licensed Programs
        IBM Advanced Function Presentation Software
        Optical Character Recognition and Bar Code Applications
        Installing and Verifying
        Converting
    Configuration Information Descriptions
      Changing the Language of Messages
      Configuring the Printer
        Printer Configuration Information
      Configuring the Host Attachments
        Configuring Parallel Channels
        Configuring ESCON Channels
        Configuring Token Ring TCP/IP
        Configuring Ethernet TCP/IP
        Configuring FDDI TCP/IP
      Configuring Remote Access
      Configuring Preprocessing and Postprocessing Devices or Interfaces
        Preprocessing/Postprocessing Options for the Simplex Models
        Preprocessing/Postprocessing Options For Duplex Models
    Configuring a Duplex Printing System
      Configuration Work Sheet for Duplex Models
    Defining Forms
      Simplex Printers
      Duplex Systems
      Form Characteristics
      Using the Forms Identification Work Sheet
        Form Identification Work Sheet
    Obtaining Supplies
      Supplies
      IBM Supplies Worksheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-Replaceable Supply Items
        Warranty Returns
      Storing Supplies
    Figures
      Tables
      Notices
        Trademarks
        Communication Statements
      Glossary
      Index
  3000 Operator tasks
    About This Book
    How to Use This Book
    Terminology
    Notation Conventions
    Pictorial Conventions
    Infoprint 3000 Library
    Related Publications
    Introducing the Infoprint 3000
      Printer Characteristics
      Printer Specifications
      Form Specifications
      System Components
      Duplex Printing Applications
        Inline Configuration for Duplex
        Left Angle Configuration for Duplex
        'h' Configuration for Duplex
      Simplex and Dual Simplex Printing Applications
        Left Angle Configuration for Dual Simplex
      Functional Areas
        Forms and the Forms Path
        Control Unit Area
        Developer Area
        Forms Input and Transfer Station Area
        Printer Control Panel
        Splicing Table
        Transfer Station Control Lever and Tractor Control Levers
        Puller Control Lever
        Fuser Entry Area
        Stacker Area
        Rear Service Area
    Operator's Overview
      Operator Responsibilities
      Normal Operation (Ready Status)
      Operator Intervention (Not Ready Status)
      Service Call Procedure
    Using the Display/Touch Screen
      Using the Display/Touch Screen in Duplex and Dual Simplex Modes
      Display/Touch Screen Windows
      Menu Summary
        Operate Pull-Down Menu
        Configure Pull-Down Menu
        Analyze Pull-Down Menu
        Options Pull-Down Menu
        Help Pull-Down Menu
      Keypad, Keyboard, and Hexpad Windows
      Symbols and Visual Cues
      Selection Devices on the Display/Touch Screen Windows
        Fingertip Control
        Push-buttons
        Selectable Field
        Radio Buttons
        Scroll Bar
        Inactive Items
      Control Procedures
        System Menu
        Multiple Procedures
        Screen Saver Timeout
      Adjusting the Display/Touch Screen Monitor
        User Controls
        On-Screen-Display Controls
    Operating the Printer
      Controlling the System Power
        Local/Remote Power Control
        Powering On the System
        Powering Off the System
        Powering On and Off Pre/Post Devices
      Shutting Down and Restarting the System
        Shutting Down the System
        Restarting the System
      Enabling and Disabling Attachments
        Remote Channel Enable/Disable
        Local Channel Enable/Disable
      Enabling/Disabling Pre/Post Interfaces
      Canceling a Job
      Changing the Password or Authorization Level
      Adjusting the Volume of the Operator Alert Assembly
      Connecting an Accessory to the Operator Alert Contacts
      Reporting Printer Usage
      Switching Printer Modes (Dual Simplex/Duplex)
        Switching from Duplex to Dual Simplex Mode
        Switching from Dual Simplex to Duplex Mode
      Switching Print Resolution
    Working With Forms
      Loading Forms (Simplex or Dual Simplex Mode)
      Loading Forms (Duplex Mode)
      Splicing Forms
      Threading and Aligning Forms
        Forms Are Loaded Through Both Printers
        Forms Are Not Loaded In Printer 2
        Forms Are Broken Between the Printers
      Threading the Buffer/Flipper Unit
        Straight Line Configuration
        Left Angle Configuration
      Adjusting the Print Position
      Using the NPRO and NPRO Page Functions to Advance Forms
        NPRO Procedure
        NPRO Page Procedure
        Pre/Postprocessing Nonprocess Runout (NPRO)
      Checking for a Front-Facing Page
      Checking the Forms Alignment
      Checking Print Quality
      Changing the Forms-Based Printer Adjustments
      Adjusting the Stacker Table Height
      Unloading the Stacker
      Using the Printer Stacker with a Postprocessing Device
      Verifying Synchronized Duplex Printing
        Enabling Verification Checking
        Disabling Verification Checking
        Recovery Procedures
    Taking Care of Problems
      Responding to Messages
        Program Check Messages
        Printer Error Messages
        Out Of Supplies Messages
        Intervention Required Messages
        Status Messages
      Forms Jams
        Forms Jam is Visible
        Forms Jam is Not Visible
        Stacker Forms Jam
        Jam Between Printer 1 and Printer 2
        Jams Between the Printer and a Postprocessing Device
        Forms Jam In the Postprocessing Device
      Clearing the Forms Path
        Transfer Station Area
        Fuser and Stacker Areas
        Stacker and Pendulum Area
      Recovering from a Forms Jam
      Preventing Jams
      Running Traces
      Print Quality Problems
      Sudden Failures
      Problem Solving Tips and Suggested Actions
    Maintaining the Printer
      Supplies
      IBM Supplies Worksheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-Replaceable Supply Items
        Warranty Returns
      Storing Supplies
      Cleaning the Printer
      Adding Fuser Oil
      Changing the Toner Cartridge
      Checking the Toner Collector
      Changing the Toner Collector
      Changing the Developer Mix
      Checking the Fine Filter
      Changing the Fine Filter
      Cleaning the Oil Belt
      Changing the Oil Belt
      Checking the Oil Pan
      Adding Supplies to Pre/Postprocessing Devices
    Configuring the System
      Configuring the Printer
        Changing the Language of Messages
        The Configuration Procedure
        Printer Configuration Information
        Configuring Remote Access
      Configuring Host Attachments
        Parallel Channel Configuration Information
        ESCON Channel Configuration Information
        Token ring TCP/IP Attachment Information
        Ethernet TCP/IP Attachment Information
        FDDI TCP/IP Attachment Information
      Configuring Preprocessing/Postprocessing Devices/Interfaces
        Pre/Postprocessor Configuration Values
      Configuration Work Sheets
        Duplex Configuration Work Sheet
        Simplex Configuration Work Sheet
      Defining Forms
        Setting/Adjusting the Contrast
        Setting/Adjusting the Preheat Platen Temperature
        Setting/Adjusting the Hot Roll Temperature
        Setting/Adjusting the Oil Rate
        Setting/Adjusting the Oil Belt Speed
        Setting/Adjusting the Paper Weight
        Form Identification Work Sheet
    Figures
      Tables
      Safety
      Summary of Changes
      Appendix A. Valid Form Lengths in Inches
      Glossary
      Index
    Appendix B. Physical System Layouts
      Simplex Models
      Duplex Models
    Appendix C. Special Features
      Move Mark Forms
      Mark Perforation on Perfless Paper
      Long Forms
    Notices
      Trademarks
      Communication Statements
  4000/4100 with Enhanced Operator Console planning and configuration tasks
    About this Publication
    Terms
    Infoprint 4000 and Infoprint 4100 Advanced Function Printers Library
    Related Publications
    Summary of Changes
    Introduction
      Printer Characteristics
      System Characteristics
        Infoprint 4000 Models ISx
        Infoprint 4000 Models IDx
        Infoprint 4000 Models IRx
        Infoprint 4100 Models
      Simplex Printers
        Components
        Printing Methods
        Configuration for a Simplex Printing System
      Duplex Systems
        Duplex System Printing Methods
          Duplex Printing
          Simplex and Dual Simplex Printing
        Components
          Printer 1
          Printer 2
          Complete duplex printing system
            Buffer/Flipper Unit
            Urge Unit
          Preprocessing/Postprocessing Interfaces
      Inline Configuration for Any Machine Type or Model
      Left-Angle Configuration for Any Machine Type or Model
      'H' Configuration for the Infoprint 4000
      'H' Configuration for the Infoprint 4100 Models PD1/2 and HD1/2
      'H' Configuration for Infoprint 4100 Models HD3/4
      Left-Angle Configuration for Dual Simplex Printing
      Basic Page-Printing Concepts
        Combining Text with Images
        Orienting Text and Images on a Page
          Portrait Orientation
          Landscape Orientation
          Normal and Tumble Duplex
        Advanced Function Image and Graphics
        Multiple-up Printing
          Basic N-up Page Positioning
          Enhanced N-up Page Positioning
          Cut Sheet Emulation
          Options for Multiple-up Printing
        Using Stored Information
      TrueType/OpenType Fonts and Unicode print data
      Enhanced Toner Loading
      IBM Infoprint 4161 Model 005 Multiple Printer Controller
      IBM Infoprint 4161 Model 006 Multiple Printer Controller
      Optional Features
        Attachments
        Function/Performance Enhancements for AFCCU with Microcode Version 11.x and Earlier
        Function/Performance Enhancements for AFCCU with Microcode Version 12.0 and Later
        Enhanced Operator Console
        Infoprint Operator Control
        Buffer/Flipper Units
        Signature Page
        Forms Identification (Barcode)
        Additional Pre/Postprocessing Interface
        Advanced Function Postprocessing Interface
        Customer Changeable Developer
        Additional Customer Changeable Developers
        Developer Cart
        Mark Perforations on Perfless Paper
        Move Mark Forms
        Infoprint Fidelity Manager (Inline Densitometer)
        Infoprint Low Resolution Books
        Infoprint Forms Management System
        Enhanced Printing Adaptor Kit
        Magnetic Ink Character Recognition (MICR) CCD
        Infoprint 4000/4100 Productivity Tracking Feature
        Internal Stacker
        CCD with Blue, Green, or Red Toners
        Commercial Print Support
    Specifications
      Printing Speed
      Print Material
      Print Quality
      Print Quality Enhancement
      Simulating Color with Gray Printing
      Printer Resolution
        240/300 Switchable Printers (Infoprint 4000 Models Only)
        480/600 Switchable Resolution
        IPDS Resolution (600 DPI Only)
          240 DPI and 300 DPI IPDS Resolution Mode
          600 DPI IPDS Resolution Mode
          Automatic IPDS Resolution Mode
        Font Smoothing Mode (480 and 600 DPI Only)
        AFP Resource Resolution
      Forms Handling
      Splicing Station
      Print Area
      Touchscreen
      Power Control
        Duplex Models
        Simplex Models
      Software Requirements
        Print on Demand
        IPDS Mode (Production Print Mode)
        Application Environment
      Host System Attachment Choices
        System/370 Channel Attachment
        Enterprise Systems Connection (ESCON) Channel Attachment
        System/390 Fiber Connection (FICON) Channel Attachment (Infoprint 4100)
        Local Area Network (LAN) Attachments
        FDDI Attachment
        Gigabit Ethernet Attachment
      Preprocessing and Postprocessing Device Interfaces
        Universal printer pre- and postprocessing interface (UP3I)
          Universal Printer Pre- and Postprocessing Interface UP3I (FC 4730)
          System requirements
          PPFA UP3I support
          Conduit support for UP3i
      Reliability, Availability, and Serviceability
      Data Security
      Resident Fonts
      Magnetic ink character recognition (MICR) CCD
        Using the Infoprint 4000/4100 to print MICR documents
        Setting up the printer for printing with MICR toner
        MICR fonts
        MICR format requirements
          Amount field, Positions 1-12
          On-us field, positions 14-31
          Transit field, positions 33-43
          External process control field, position 44 (optional)
          Auxiliary on-us field, positions 45-65 (optional)
        MICR quality control
          Quality control tools
        MICR quality and format verification
          Sampling frequency
          Vertical registration
          Horizontal registration
          Clear band area
          Voids
      Using highlight color with the Infoprint 4000 and Infoprint 4100
        Prerequisites
        Aligning the printhead
        Considering print registration
        Planning the application
          Designing the document
          Example of highlight color application: OUTBACK
        Application considerations
          Page synchronization
            Duplex Side 1/2 Verification
            Program-controlled synchronization verification
          System software support differences
        Threading the printer (side 1 to side 1)
          Straight line configuration (side 1 to side side 1)
          Left angle configuration (side 1 to side 1)
          H-configuration (side 1 to side 1)
    Organizing the Planning Team
      Planning Coordinator
      Physical Planner
      System and Application Programmers
      Operator
      Implementation Plan
        Fifteen Weeks Before Delivery
        Ten Weeks Before Delivery
        Eight Weeks Before Delivery
        Six Weeks Before Delivery
        Four Weeks Before Delivery
        Arrival of the Printer
    Preparing the Processing Environment
      Channel and Local Area Network Attachments
        System/370 Channel Attachment
        ESCON Channel Attachment
           ESCON Multiple Host Environment
        FICON Channel Attachment ( Infoprint 4100)
        Token Ring TCP/IP Local Area Network
        Ethernet TCP/IP Local Area Network
        Gigabit Ethernet SX (fiber) TCP/IP Local Area Network
        Gigabit Ethernet TX (copper) TCP/IP Local Area Network
        FDDI Local Area Network
        Attachment cable features
          Selecting a cable feature
        Performance Considerations
          System/370 Attachment
           ESCON Attachment
          FICON Attachment
      Direct-Attach
      Advanced Function Presentation Licensed Programs
        IBM Advanced Function Presentation Software
        Optical Character Recognition and Bar Code Applications
          BCOCA Support
          Document Composition Facility (Programnbsp;5748-XX9)
          Bar Codes and Optical Character Recognition Fonts (Programnbsp;5688-021)
        Installing and Verifying
        Conversion
    Preparing the Physical Environment
      Environmental Requirements
      Environmental Impact
        Heat/Power
        Sound
      Physical Requirements
        Normal Precautions to Prevent Fire
        Power Requirements
          Power Outlet and Cable Summary
          Power - Print engine
          Power - Printer control unit (Infoprint 4100 HS2 and HD3/4 only)
          Power - Air Bearing Buffer/Flipper Unit
          Physical installation power and grounding recommendations
            Power recommendations
            Grounding recommendations
            Auxiliary power source recommendations
        Additional electrical requirements
        Interface point requirements for low frequency phenomena
        Print Engine Power Cable and Receptacle
          U.S. and Canada
          All Other Countries
        Vacuum Cleaner
        CE Toolkit
      Space Requirements
        Duplex Systems
          Inline Configuration for All Infoprint 4000 Models with the Short Buffer/Flipper Unit
          Inline Configuration for All Infoprint 4000 Models with the Tall Buffer/Flipper Unit
          Left-Angle Configuration for All Infoprint 4000 Models with the Tall Buffer/Flipper Unit
          'H' Configuration for All Infoprint 4000 Models with the Tall or Short Buffer/Flipper Unit (both printers facing the same direction)
          Inline Configuration for Infoprint 4100 Models PD1/2 and HD1/2 with the Tall Buffer/Flipper Unit
          Inline Configuration for All Infoprint 4100 Models with the Air Bearing Buffer/Flipper Unit
          Left-Angle Configuration for Infoprint 4100 Models PD1/2 and HD1/2 with the Tall Buffer/Flipper Unit
          Left-Angle Configuration for Infoprint 4100 Models HD3/4 with the Tall Buffer/Flipper Unit
        'H' Configuration for All Infoprint 4100 Models with the Tall Buffer/Flipper Unit (both printers facing the same direction)
        Simplex Systems
          Infoprint 4000 Models
          Infoprint 4100 Models
        Systems with the Dual Inline Densitometer
        Physical Layout
        Shipping Notes
      Physical Dimensions
      Physical Attachment Requirements
      Installation Requirements
    Selecting and Testing Forms
      Continuous Forms
        Stacking Forms
      Special-Purpose Materials
        Preprinted Forms
      Storing Print Materials
      Testing Forms and Applications
      Valid Form Lengths in Inches
      Form Lengths Not Supported with the Signature Page Feature (Infoprint 4000 Models Only)
    Setting Printer Definition Values
      Changing the Language of Messages
      Defining the Printer
        Printer Definition Information
      Defining the Host Attachments
      Defining Interfaces and Preprocessing or Postprocessing Devices
        Options for Duplex Models
        Options for Simplex Models
      Defining Remote Access
    Establishing Form Settings
    Creating a Snapshot
    Appendix A. Obtaining Supplies
      Supplies
      IBM Supplies Work Sheet
        Infoprint 4000 Supplies Work Sheet
        Infoprint 4100 Supplies Work Sheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-replaceable Supply Items
        Warranty Returns
      Storing Supplies
    Appendix B. Work Sheets
      Installation Planning Work Sheet
      Physical Planning Work Sheet
      Duplex Definition Work Sheet
      Simplex Definition Work Sheet
      Snapshots Work Sheet
    Appendix C. Standard Power Plug Listings
    Notices
      Trademarks
      Product Recycling and Disposal
      Communication Statements
    Glossary
    Index
  4000/4100 with Enhanced Operator Console operator tasks
    About this book
    Terminology
    Notation conventions
    Publications guide
    Safety
    Introducing the printer
      Functional areas
        About forms and forms path
        About the control unit area
          About the operator alert assembly
          About the operator alert lights on the Infoprint 4100 Models HS2 and HD3/4
          About the touchscreen
          About the mouse
          About the keyboard
          About the diskette drive
          About the power control panel
        About the printer operator panel
          About the display
          About the function keys
          About the indicators
        About the developer
        About the forms input area and transfer station area
        About the printer control panel
        About the splicing table
        About the transfer station control lever and tractor control knob
        About the vacuum, stack height, and puller controls
        About the fuser entry area
        About the stacker area
          About the stacker control panel
        About the rear service area
    Operator's overview
      Operator responsibilities
      Normal operation (Ready status)
      Operator intervention (Not Ready status)
      Service call procedure
    Using the touchscreen
      The Enhanced Operator Console
      Tabs, buttons, and panels
      Adjusting the touchscreen
        User controls
        On-screen-display controls
        Problem resolution
    Operating the printer
      Controlling the system power
        Local/remote power control
        Powering on the system
          In host-controlled remote mode
          In local controlled mode
        Powering off the system
          In host-controlled remote mode
          In local controlled mode
          Emergency power off
      Shutting down and restarting the system
        Shutting down the system
        Restarting the system
      Configuring the printer
        Configuring remote access
        Configuring e-mail traces
        Configuring attachments
      Enabling and disabling attachments
        Remote channel enable/disable
        Local channel enable/disable
          Enabling a host attachment
          Disabling a host attachment
      Enabling and disabling pre/postprocessors
      Configuring pre/postprocessors
      Canceling a job
      Authorization levels
        Changing access levels and passwords
      Managing and defining new users
      Loading configuration from diskette
      Adjusting the volume of the operator alert assembly
      Connecting an accessory to the operator alert contacts
      Reporting printer usage
      Switching printer modes (dual simplex/duplex) and printer speed
        Switching from duplex to dual simplex mode
        Switching from dual simplex to duplex mode
        Switching printer speeds
    Working with forms
      Snapshots
        Viewing Snapshots
        Sorting and searching Snapshots
        Loading a Snapshot
        Saving changes to Snapshots
        Saving a new Snapshot
        Deleting a Snapshot
        Restoring Snapshot settings from diskette
      Loading forms--auto load (dual simplex mode)
        At the touchscreen or the printer operator panel
        At the printer forms input area
        At the touchscreen
        At the stacker control panel
        At the printer control panel (tractored forms)
        At the printer control panel (tractorless forms or no Auto Load controls)
        At the printer
        At the touchscreen or the printer control panel
      Loading forms--auto load (duplex mode)
      Loading forms without manual reload--auto load (duplex mode)
        Feeding new forms through the printer
        Adjusting the printer for new forms
        Loading the correct forms settings
      Loading forms--semiautomatic load (dual simplex mode)
      Checking the tension arm
      Adjusting the upper and lower tension arm springs on the Infoprint 4000
      Adjusting the lower tension arm spring for the Infoprint 4100
      Splicing forms on the Infoprint 4000
      Splicing forms on the Infoprint 4100
        Splicing tractorless forms
      Aligning tractored forms
        Forms loaded through both printers
        Forms are not loaded in Printer 2
        Forms are broken between the printers
      Aligning tractorless forms
      Threading the Buffer/Flipper Unit (duplex)
        Straight line configuration
        Left angle configuration
        H-configuration
      Setting print registration
      Using the NPRO function to advance forms
        NPRO procedure
        NPRO Advance One Page procedure
      Checking for a front-facing page
      Checking forms alignment
      Checking print quality
        Engine print balancing procedure
          Balancing print contrast between Printer 1 and Printer 2
          Balancing print boldness between Printer 1 and Printer 2
      Unloading the stacker
      Using the printer stacker with a postprocessor
      Verifying synchronized duplex printing
    Taking care of problems
      Responding to messages
        Operator message codes
        Intervention messages
        0133 Skew error
        0119 Upper tractor forms jam
        079A, 0131, 0132 Tension errors
        D720 Verification mark position incorrect
        0134 Fuser wrap
        0093 Input loop paper jam
        0161 Stacker jams
        Hard program checks
        Status messages
          Status message summary
      Forms jams
        Forms jam is visible
        Forms jam is not visible
        Stacker forms jam
        Transfer station area forms jam
        Upper fuser forms jam
        Stacker pendulum forms jam
        Forms jam between Printer 1 and Printer 2
        Jams between the printer and a postprocessing device
        Forms jam in the postprocessing device
      Clearing the forms path
        Transfer Station area
        Fuser area and Stacker area
        Stacker and Pendulum area
      Recovering from a forms jam
      Suggestions for preventing jams
      Running traces
      Print quality problems
      Sudden failures
      Problem solving tips and suggested actions
    Maintaining the printer
      Cleaning the printer
        Developer area
        Forms input area
        Transfer station area
        Stacker area
        Buffer/Flipper unit
        Rear service area
      Adding fuser oil
      Adding toner
      Adding toner bottles (Infoprint 4000)
      Adding a toner cartridge (Infoprint 4100)
      Checking the toner collector
      Changing the toner collector
      Changing the developer mix
      Checking the fine filter
      Changing the fine filter
      Cleaning the oiler belt
      Changing the oiler belt
      Checking the absorbent pad in the oil pan
      Adding supplies
      Obtaining supplies
    Appendix. Features
      Move Mark Forms Feature (RPQ 8B3964)
      Mark Perforation on Perfless Paper Feature (RPQ 8B3965)
      Enabling long forms
      Signature Page Feature (FC 8B4053)
      No forms size error checking
      Changing the Customer Changeable Developer (CCD)
        Removing the developer
        Installing the developer
      Magnetic ink character recognition (MICR) CCD
        Using the Infoprint 4000/4100 to print MICR documents
        Setting up the printer for printing with MICR toner
        MICR fonts
        MICR format requirements
          Amount field, Positions 1-12
          On-us field, positions 14-31
          Transit field, positions 33-43
          External process control field, position 44 (optional)
          Auxiliary on-us field, positions 45-65 (optional)
        MICR quality control
          Quality control tools
        MICR quality and format verification
          Sampling frequency
          Vertical registration
          Horizontal registration
          Clear band area
          Voids
      Inline Densitometer for High Resolution Printers Feature (FC 4832)
        Threading the densitometer unit
          Adjusting the upper tension arm spring
        Adjusting print density
      Inline Densitometer for Low Resolution Printers Feature (FC 4833)
        Threading the densitometer unit
        Adjusting print density
          Measuring density
      Forms Identification (Barcode) Feature (FC 4464)
        Defining a form barcode
        Loading pre-printed barcode forms
          Barcode Structure
          Hexadecimal Values
          Barcode Size and Placement
        Cleaning the Forms Barcode Sensor
        Problem resolution
          Disabling Form Barcode Checking
      Stacker Basket Feature (FC 4775)
      Using highlight color with the Infoprint 4000 and Infoprint 4100
        Prerequisites
        Aligning the printhead
        Considering print registration
        Planning the application
          Designing the document
          Example of highlight color application: OUTBACK
        Application considerations
          Page synchronization
            Duplex Side 1/2 Verification
            Program-controlled synchronization verification
          System software support differences
        Threading the printer (side 1 to side 1)
          Straight line configuration (side 1 to side side 1)
          Left angle configuration (side 1 to side 1)
          H-configuration (side 1 to side 1)
      Universal Printer Pre- and Postprocessing Interface (UP3I) (FC 4730)
      Adjusting the paper guides for lightweight paper
      Infoprint Manager Operations for AIX on the Enhanced Operator Console Feature (FC 4560)
        Enabling the TCP/IP attachment
        Using the Infoprint Manager Operations GUI from the printer console
      Preheat Platen Teflon Mat (RPQ 8B5023)
        Installing the teflon mat and wear strip
        Removing the teflon mat and wear strip assembly
    Notices
      Trademarks
      Product Recycling and Disposal
      Communication Statements
    Glossary
    Index
  4100 with InfoPrint Controller Planning and Configuration Guide
    Preface
      About this Publication
      Terms
      InfoPrint 4100 Models MS1, HS2, HS3, MD1/2, HD3/4, HD5/6, TS1, TS2, TD1/2, and TD3/4 Advanced Function Printers Library
      Related Publications
    Introduction
      Printer Characteristics
      System Characteristics
        InfoPrint 4100 Models
      Simplex Printers
        Components
        Printing Methods
        Configuration for a Simplex Printing System
      Duplex Systems
        Duplex System Printing Methods
          Duplex Printing
          Dual Simplex Printing
        Components
          Printer 1
          Printer 2
          Complete duplex printing system
            Web Cooling System
            Air Bearing Flipper and Tall Buffer/Flipper Unit
            Paper Paths and Feature Codes
          Preprocessing/Postprocessing Interfaces
      Inline Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 with Web Cooling System
      Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
      H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 with Web Cooling System
      Left-Angle Configuration for Dual Simplex Printing without Web Cooling System
      Inline Configuration for InfoPrint 4100 Models MD1/2 or TD1/2 without Web Cooling System
      Inline Configuration for InfoPrint 4100 Models HD3/4 or TD3/4 without Web Cooling System
      Inline Configuration for InfoPrint 4100 Models HD5/6 without Web Cooling System
      Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 without Web Cooling System
      H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 without Web Cooling System
      Basic Page-Printing Concepts
        Combining Text with Images
        Orienting Text and Images on a Page
          Portrait Orientation
          Landscape Orientation
          Normal and Tumble Duplex
        Advanced Function Image and Graphics
        Multiple-up Printing
          Basic N-up Page Positioning
          Enhanced N-up Page Positioning
          Cut Sheet Emulation
          Options for Multiple-up Printing
        Using Stored Information
      TrueType/OpenType Fonts and Unicode print data
      Enhanced Toner Loading
      Magnetic Ink Character Recognition (MICR) CCD
        Magnetic ink character recognition (MICR)
          Using the InfoPrint 4100 to print MICR documents
          Setting up the printer for printing with MICR toner
          MICR fonts
          MICR format requirements
            Amount field, Positions 1-12
            On-us field, positions 14-31
            Transit field, positions 33-43
            External process control field, position 44 (optional)
            Auxiliary on-us field, positions 45-65 (optional)
          MICR quality control
            Quality control tools
          MICR quality and format verification
            Sampling frequency
            Vertical registration
            Horizontal registration
            Clear band area
            Voids
      Customer Changeable Developer
      Additional Customer Changeable Developers
      Developer Cart
    Specifications
      Printing Speed
      Print Material
      Print Quality
      Print Quality Enhancement
      AFP Color Emulation Feature (FC 4850 or 4851)
      Simulating Color with Gray Printing
      Printer Resolution
        480/600 Switchable Resolution
        IPDS Resolution (600 dpi Only)
          240 dpi and 300 dpi IPDS Resolution Mode
          600 dpi IPDS Resolution Mode
          Automatic IPDS Resolution Mode
        Font Smoothing Mode (480 and 600 dpi Only)
        AFP Resource Resolution
      Forms Handling
      Splicing Station
      Print Area
      Touch panel
      Power Control
        Duplex Models
        Simplex Models
      Software Requirements
        IPDS Print on Demand (POD)
        IPDS Production Print
        Application Environment
      Host System Adapter Choices
        Gigabit Ethernet Adapter
        System/390 Fiber Connection (FICON) Channel Adapter
        Enterprise Systems Connection (ESCON) Channel Adapter
      Preprocessing and Postprocessing Device Interfaces
        Universal printer pre- and postprocessing interface (UP3I)
          Universal Printer Pre- and Postprocessing Interface UP3I
          System requirements
          PPFA UP3I support
          Conduit support for UP3i
      Reliability, Availability, and Serviceability
      Data Security
      Resident Fonts
    Organizing the Planning Team
      Planning Coordinator
      Physical Planner
      System and Application Programmers
      Operator
      Implementation Plan
        Fifteen Weeks Before Delivery
        Ten Weeks Before Delivery
        Eight Weeks Before Delivery
        Six Weeks Before Delivery
        Four Weeks Before Delivery
        Arrival of the Printer
    Preparing the Processing Environment
      Network Adapters
        Gigabit Ethernet SX (fiber) TCP/IP Local Area Network
        Gigabit Ethernet TX (copper) TCP/IP Local Area Network
        FICON Channel Adapter
        ESCON Channel Adapter
        Multiple Host Environment
      Adapter cable features
        Selecting a cable feature
      Performance Considerations
      SNMP Remote Access
      Advanced Function Presentation Licensed Programs
        InfoPrint Advanced Function Presentation Software
        Optical Character Recognition and Bar Code Applications
          BCOCA Support
          Page Printer Formatting Aid (Program 5688-190)
        Installing and Verifying
        Conversion
    Preparing the Physical Environment
      Environmental Requirements
        Normal Precautions to Prevent Fire
        Vacuum Cleaner
      Physical Requirements
        Power Requirements
          Power Outlet and Cable Summary
          Print Engine Power Cable and Receptacle
            All Countries Except the U.S.A. and Canada (All Models)
            U.S.A. and Canada (Models MS1, HS2, MD1/2, HD3/4, TS1, and TD1/2)
            U.S.A. and Canada (Models HS3, HD5/6, TS2, and TD3/4)
          Physical installation Power and Grounding Recommendations
            Power recommendations
            Grounding recommendations
            Auxiliary power source recommendations
            Additional electrical requirements for 50Hz 400 V installations
            Interface point Requirements for low frequency phenomena
          Common Electrical Requirements
      Environmental Impact
        Heat Dissipation, Power, and Acoustics (Models MS1, MD1/2, TS1, and TD1/2)
        Heat Dissipation, Power, and Acoustics (Models HS2 and HD3/4)
        Heat Dissipation, Power, and Acoustics (Models HS3 and HD5/6)
        Heat Dissipation, Power, and Acoustics (Models TS2 and TD3/4)
      Space Requirements
        Duplex Systems
          Inline Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
          Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
          H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
          Inline Configuration for InfoPrint 4100 Models MD1/2 or TD1/2 without Web Cooling System
          Inline Configuration for InfoPrint 4100 Models HD3/4 or TD3/4 without Web Cooling System
          Inline Configuration for InfoPrint 4100 Model HD5/6 without Web Cooling System
          Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 without Web Cooling System
          H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 without Web Cooling System
        Simplex Systems
          InfoPrint 4100 Models
        Physical Layout
        Shipping Notes
      Physical Dimensions
      Physical Attachment Requirements
      Installation Requirements
    Selecting and Testing Forms
      Continuous Forms
        Stacking Forms
      Special-Purpose Materials
        Preprinted Forms
      Storing Print Materials
      Testing Forms and Applications
      Valid Form Lengths in Inches
    Setting Printer Definition Values
      Changing the Language of Messages
      Changing Access Levels and Passwords
        Managing and Defining New Users
      Defining the Printer
        Configuring the Printer
        Printer Definition Information
      Defining Adapters
        Configuring Adapters
      Defining Protocols
        Configuring Protocols
      Defining Remote Access
        Configuring Remote Access for SNMP
        Configuring Remote Access for Online Access (Web Pages)
        Configuring Remote Access for E-mail
        Configuring Remote Access for PRSCD (Printer Reported Service and Configuration Data)
        Configuring Remote Access to Host using Telnet 3270
        Configuring Remote Access to Host using Telnet 5250
        Configuring Remote Access to InfoPrint Process Director (IPPD) on the Host
      Troubleshooting LAN Connectivity and LAN Communication Problems
      Defining Interfaces and Preprocessing or Postprocessing Devices
        Options for Simplex and Duplex Models
    Establishing Form Settings
    Creating and Copying Snapshots
      Creating and saving Snapshots
      Editing multiple Snapshots
      Saving Print Quality Settings to a Snapshot
      Understanding Print Quality
      Copying Snapshots between InfoPrint Controllers
      Copying Snapshots from the AFCCU to the InfoPrint Controller
    Appendix A. Obtaining Supplies
      Supplies
      Supplies Work Sheet
        InfoPrint 4100 Models MS1, MD1/2, TS1, and TD1/2 Supplies Work Sheet
        InfoPrint 4100 Models HS2 and HD3/4 Supplies Work Sheet
        InfoPrint 4100 Models TS2 and TD3/4 Supplies Work Sheet
        InfoPrint 4100 Models HS3 and HD5/6 Supplies Work Sheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-replaceable Supply Items
        Warranty Returns
      Storing Supplies
    Appendix B. Work Sheets
      Installation Planning Work Sheet
      Physical Planning Work Sheet
      Duplex Definition Work Sheet
      Simplex Definition Work Sheet
      Snapshots Work Sheet
    Appendix C. Standard Power Plug Listings
    Notices
      Product recycling and disposal
      Trademarks
      Communication statements
    Glossary
    Index
  4100 with POWER Controller Operator's Guide
    Figures
    Tables
    Safety
    Preface
      About this book
      Terminology
      Notation conventions
      Publications guide
    Introducing the printer
      Functional areas
        About forms and forms path
        About the control unit area
          About the operator alert assembly
          About the operator alert lights
          About the touch panel
          About the mouse
          About the keyboard and USB flash memory device
          About the power control panel
        About the printer operator panel
          About the display area on the printer operator panel
          About the function keys
          About the indicators
        About the developer
        About the forms input area and transfer station area
        About the printer control panel
        About the splicing table
        About the transfer station
        About the vacuum, stack height, and puller controls
        About the fuser entry area
        About the forms exit area
          About the stacker control panel
        About the rear service area
        About the power control panel
          About the local and remote power controls
      Operator console
        The Main touch panel
        Tabs on the Main touch panel
        Buttons on the Main touch panel
        Areas on the Main touch panel
        User controls
        On-screen-display (OSD) controls
    Operator's overview
      Operator Responsibilities
      Normal operation (Ready status)
      Operator intervention (Not Ready status)
      Service call procedure
    Operating the printer
      About the power control panel
      About the local and remote power controls
      Powering on the system
        Powering on the system in local-controlled mode
      Powering off the system
        Powering off in local-controlled mode
        Powering off the system using the Unit Emergency switch
      Shutting down and restarting the system
        Shutting down the system
        Restarting the system
      Enabling and disabling protocols
      Enabling and disabling pre/postprocessors
      Canceling a job
      Adjusting the volume of the operator alert assembly
      Adjusting the touch panel
      Reporting printer usage
      Switching printer modes and printer speed
        Switching from Duplex to Dual Simplex mode
        Switching from Dual Simplex to Duplex mode
        Switching printer speeds
    Working with Snapshots
      Viewing Snapshots
      Sorting and searching Snapshots
      Loading Snapshots
      Creating Snapshots
      Changing values in Snapshots
      Saving changed Snapshots
      Deleting Snapshots
      Restoring Snapshots
    Working with forms
      Loading forms
        Choosing a load procedure
        Paper paths
        Removing forms
        Loading tractored roll-feed forms
          Threading the forms
          Aligning the forms on the tractor pins
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Checking alignment of tractored forms
          Starting the printer
        Loading tractored fan-fold forms
          Positioning boxed fan-fold forms in the forms input area
          Threading the forms
          Aligning the forms on the tractor pins
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Checking alignment of tractored forms
          Starting the printer
        Loading tractorless roll-feed forms
          Threading forms
          Adjusting the tractorless feeding unit
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Starting the printer
        Loading special forms
          Positioning boxed fan-fold forms in the forms input area
          Adjusting the tractorless feeding unit
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Checking alignment of tractored forms
          Setting print registration
          Starting the printer
          Setting the forms length for Auto Load
          Starting the Auto Load sequence
        Switching between tractored and tractorless forms
          Feeding new forms through the printer
          Adjusting the printer for new forms
          Loading the correct forms settings
        Adjusting the rear paper-edge guide and Dual Toner Mark/Side Verify Sensor
        Checking the tension arm
        Splicing tractored forms
        Aligning tractored forms
          Aligning forms in both printers
          Aligning forms with no forms in Printer 2
          Aligning forms when forms are broken between printers
        Aligning tractorless forms
        Threading a duplex system
          Threading a duplex system in a straight-line (inline) configuration
          Threading a duplex system in a left-angle configuration
          Threading a duplex system in an H configuration
        Setting printer resolution
        Setting print registration
        Setting printer registration
        Non-Process Runout (NPRO)
        Advancing forms using NPRO
        Advancing one page using NPRO
        Checking for front-facing pages
        Checking forms alignment
        Checking print quality
          Saving Print Quality Settings to a Snapshot
          Engine print balancing procedures
            Balancing print contrast between Printer 1 and Printer 2
            Balancing print boldness between Printer 1 and Printer 2
      Unloading the stacker
      Using the printer stacker with a postprocessor
      Verifying synchronzied duplex printing for tractored forms
      Special marks
        Using side verify marks
        Using registration marks for tractorless printing
        Using registration marks for top of form
        Using registration marks for UP3I synchronization
        Creating user-defined registration marks
    Taking care of problems
      Responding to messages
        Operator message codes
        Intervention messages
          0133 Skew error
          0119 Upper tractor forms jam
          079A, 0131, 0132 Tension errors
          D720 Verification mark position incorrect
          0134 Fuser wrap
          0093 Input loop paper jam
          0161 Stacker jams
        Hard program checks
        Status messages
      Clearing forms jams
        Clearing a forms jam when the jam is visible
        Clearing a forms jam when the jam is not visible
        Clearing a forms jam in the Stacker
        Clearing a forms jams in the Transfer Station, the Upper Fuser, or the Forms Exit area
        Clearing a forms jam between Printer 1 and Printer 2
        Clearing a forms jam between the printer and a postprocessing device
        Clearing a forms jam in a postprocessing device
      Clearing the forms path
        Clearing the forms path in the Transfer Station area
        Clearing the forms path in the Fuser area
        Clearing the forms path in the Stacker and Pendulum areas
      Recovering from a forms jam
      Suggestions for preventing jams
      Traces
        Saving traces to USB flash memory devices
        E-mailing traces
        Archiving traces to the hard drive
      Print quality problems
      Sudden failures
        Problem solving tips
    Cleaning and Servicing the printer
      Cleaning the developer area
      Cleaning the customer-replaceable corona wires and developer area
      Cleaning the forms input area
      Cleaning the transfer station area
      Cleaning the stacker area
      Cleaning the buffer/flipper unit
      Cleaning the rear service area
      Adding fuser oil
      Adding a toner cartridge
      Checking the toner collector
      Changing the toner waste collector bag
      Changing the developer mix
      Checking the fine filter
      Changing the fine filter
      Cleaning the oiler belt
      Changing the oiler belt
      Checking the absorbent pad in the oil pan
      Replacing the customer-replaceable corona wires
      Adding supplies
    Help topics for the InfoPrint POWER Controller operator console
      Using the help system
      Main touch panel
      Logon window
        Manage Users window
      Frequent Tasks panels
        Snapshot panel
        Manage Protocols panel
        Cancel Current Job panel
        Clear IPDS Buffers panel
        Pre/Postprocessors panel
        Activity Entry window (with Feature Code 4565)
        InfoPrint Manager panel (with Feature Code 4560)
      Forms panels
        Form Settings panel
          Marks window
        Special Marks panel
          Special Marks - Edit window
        Align Forms panel
        Print Registration panel
        Advance Paper (NPRO) panel
        Front Facing panel
      Maintenance panels
        Print Samples panel
        Touch Panel panel
        Backup and Recovery panel
        Traces panel
          Trace Archive window
           Configure Control Unit Trace window (Service only)
        Diagnostic panels (Service only)
           Diagnostics - Adapter panel (Service only)
          Diagnostics - Mechanism panel (Service only)
          Diagnostics - Pre/Postprocessors panel (Service only)
          Diagnostics - Print Quality Mode panel (Service only)
        Logs panel (Service only)
           Preventative Maintenance panel (Service only)
          Error Log panel (Service only)
      Printer Definition panels
        Print Quality panel
           Beam Adjustments window (Service only)
          Print Quality Enhancement window (Service only)
        Printer panels
          Printer - Basic panel
          Printer - Setup panel
          Printer - Date/Time panel
          Printer - Service panel (Service only)
          Printer - Resource Utilization panel (Service only)
          Printer - Version panel
        Printer Definition Language (PDL) panels
          PDL - IPDS panel
        Network panels
          Network - Attachments panel
          Network - Adapters window
          Network - Remote Access panel
             Remote Access - SNMP panel
             Remote Access - Online Access panel
            Remote Access - E-mail panel
             Remote Access - PRSCD panel
          Network - Restricted Access panel
          Network - Status panel
        Pre/Postprocessors panels
          Pre/Postprocessing panel
          Postprocessing Options panel
          UP3i Devices panel
        Features panel
    Help topics for the InfoPrint 4100 Online Access Web Pages
      InfoPrint 4100 Online Access Web Pages
      Login page
      Status page
      Details page
      Network page
      Snapshot page
      Snapshots Editor page
      Preventive Maintenance Log page
      Error Log page (Service only)
      Login History page
      Traces page
      Microcode Update page (Service only)
      Version page
    Features
      Using the Move Mark Forms feature (RPQ 8B3964)
      Using the Side 2 Verify Disable feature (RPQ 8B4282)
      Using the Dual Toner Mark/Side Verify Sensor (FC 4570/9570)
        Using the Dual Toner Mark/Side Verify sensor in Duplex mode
        Using the Dual Toner Mark/Side Verify sensor for same side printing
      Using the Signature Page feature (FC 4553)
      Using the Forms Size Check feature (RPQ 8B4027)
      8.0" Forms Width Support feature (RPQ 8B5045)
      Productivity Tracking Feature (FC 4565)
      Using the MICR feature (FC 4481 and 9471) for InfoPrint Models HS2, HS3, HD3/4, and HD5/6
      Changing the Customer Changeable Developer (CCD)
        Removing the Customer Changeable Developer
        Installing the Customer Changeable Developer
      Using the Stacker Basket Extension (FC 4775) feature
      Forms Identification (Bar Code) feature (FC 4464)
        Adding or changing a form bar code for an existing Snapshot
        Defining a form bar code for a new Snapshot
        Loading preprinted bar code forms
        Cleaning the forms bar code sensor
        Disabling Form Bar Code checking
        Problem resolution when using preprinted bar code forms
      Using the Universal Printer Pre- and Postprocessing Interface (UP3I) (FC 4740)
      InfoPrint Manager Operations for AIX feature (FC 4560) on the InfoPrint POWER Controller Operator Console
        Enabling the IPDS TCP protocol for the IPM feature
        Using the InfoPrint Manager Operations feature
      Using the Commercial Print Support (FC 4940)
        Installing and removing the PTFE Mat and PTFE wear strips
          Installing the PTFE mat and wear strip
          Removing the PTFE mat and wear strip assembly
      Enabling Feature Codes and RPQs
      Disabling Feature Codes and RPQs
      Uninstalling Feature Codes and RPQs
    Notices
      Trademarks
      Product recycling and disposal
      Communication statements
    Glossary
    Index
  3000 Introduction and planning tasks
    About This Publication
    Terms
    Infoprint 3000 Library
    Related Publications
    Summary of Changes
    Introduction
      Printer Characteristics
      Infoprint 3000 Printer and Form Specifications
        Printer Specifications
        Form Specifications
      Simplex Printers
        Components
        Printing Methods
      Duplex Systems
        Components
        Duplex System Printing Methods
      Configuration for a Simplex Printing System
      Inline Configuration for a Duplex Printing System
      Left Angle Configuration for a Duplex Printing System
      Left Angle Configuration for a Dual Simplex Printing System
      'h' Configuration for a Duplex Printing System
      Basic Page-Printing Concepts
        Combining Text with Images
        Orienting Text and Images on a Page
        Advanced Function Image and Graphics
        Multiple-Up Printing
        Using Stored Information
      Optional Features
        Mark Perforations on Perfless Paper
        Move Mark Forms
    The Advanced Function Printers Characteristics
      Printing Speed
      AFCCU Processor Performance Options
      Print Material
      Print Quality
      Print Quality Enhancement
      Printer Resolution
        480/600 Switchable Printers
        IPDS Resolution Acceptance (600 DPI Resolution Only)
        Font Enhancement Mode
        AFP Resource Resolution
      Print Area
      Control Unit Processor Memory
      Display Touch Screen
      Power Control
        Simplex Models
        Duplex Models
      Software Requirements
        IPDS
        Application Environment
      Host System Attachment Choices
        System/370 Channel Attachment
        Enterprise Systems Connection (ESCON) Channel Attachment
        Local Area Network (LAN) Attachments
        FDDI Attachment
      Preprocessing and Postprocessing Device Interfaces (Optional)
      Reliability, Availability, and Serviceability
      Data Security
      Resident Fonts
    Organizing the Planning Team
      Planning Coordinator
      Physical Planner
      System and Application Programmers
      Operator
      Implementation Plan
        Fifteen Weeks before Delivery
        Ten Weeks before Delivery
        Eight Weeks before Delivery
        Six Weeks before Delivery
        Four Weeks before Delivery
        Arrival of the Printer
    Preparing the Processing Environment
      Channel and Local Area Network Attachments
        System/370 Channel Attachment
        ESCON Channel Attachment
        ESCON Multiple-Host Environment
        Token Ring TCP/IP Local Area Network
        Ethernet TCP/IP Local Area Network
        FDDI Local Area Network
        Performance Considerations
      Direct-Attach
      Advanced Function Presentation Licensed Programs
        IBM Advanced Function Presentation Software
        Optical Character Recognition and Bar Code Applications
        Installing and Verifying
        Converting
    Configuration Information Descriptions
      Changing the Language of Messages
      Configuring the Printer
        Printer Configuration Information
      Configuring the Host Attachments
        Configuring Parallel Channels
        Configuring ESCON Channels
        Configuring Token Ring TCP/IP
        Configuring Ethernet TCP/IP
        Configuring FDDI TCP/IP
      Configuring Remote Access
      Configuring Preprocessing and Postprocessing Devices or Interfaces
        Preprocessing/Postprocessing Options for the Simplex Models
        Preprocessing/Postprocessing Options For Duplex Models
    Configuring a Duplex Printing System
      Configuration Work Sheet for Duplex Models
    Defining Forms
      Simplex Printers
      Duplex Systems
      Form Characteristics
      Using the Forms Identification Work Sheet
        Form Identification Work Sheet
    Obtaining Supplies
      Supplies
      IBM Supplies Worksheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-Replaceable Supply Items
        Warranty Returns
      Storing Supplies
    Figures
      Tables
      Notices
        Trademarks
        Communication Statements
      Glossary
      Index
  3000 Operator tasks
    About This Book
    How to Use This Book
    Terminology
    Notation Conventions
    Pictorial Conventions
    Infoprint 3000 Library
    Related Publications
    Introducing the Infoprint 3000
      Printer Characteristics
      Printer Specifications
      Form Specifications
      System Components
      Duplex Printing Applications
        Inline Configuration for Duplex
        Left Angle Configuration for Duplex
        'h' Configuration for Duplex
      Simplex and Dual Simplex Printing Applications
        Left Angle Configuration for Dual Simplex
      Functional Areas
        Forms and the Forms Path
        Control Unit Area
        Developer Area
        Forms Input and Transfer Station Area
        Printer Control Panel
        Splicing Table
        Transfer Station Control Lever and Tractor Control Levers
        Puller Control Lever
        Fuser Entry Area
        Stacker Area
        Rear Service Area
    Operator's Overview
      Operator Responsibilities
      Normal Operation (Ready Status)
      Operator Intervention (Not Ready Status)
      Service Call Procedure
    Using the Display/Touch Screen
      Using the Display/Touch Screen in Duplex and Dual Simplex Modes
      Display/Touch Screen Windows
      Menu Summary
        Operate Pull-Down Menu
        Configure Pull-Down Menu
        Analyze Pull-Down Menu
        Options Pull-Down Menu
        Help Pull-Down Menu
      Keypad, Keyboard, and Hexpad Windows
      Symbols and Visual Cues
      Selection Devices on the Display/Touch Screen Windows
        Fingertip Control
        Push-buttons
        Selectable Field
        Radio Buttons
        Scroll Bar
        Inactive Items
      Control Procedures
        System Menu
        Multiple Procedures
        Screen Saver Timeout
      Adjusting the Display/Touch Screen Monitor
        User Controls
        On-Screen-Display Controls
    Operating the Printer
      Controlling the System Power
        Local/Remote Power Control
        Powering On the System
        Powering Off the System
        Powering On and Off Pre/Post Devices
      Shutting Down and Restarting the System
        Shutting Down the System
        Restarting the System
      Enabling and Disabling Attachments
        Remote Channel Enable/Disable
        Local Channel Enable/Disable
      Enabling/Disabling Pre/Post Interfaces
      Canceling a Job
      Changing the Password or Authorization Level
      Adjusting the Volume of the Operator Alert Assembly
      Connecting an Accessory to the Operator Alert Contacts
      Reporting Printer Usage
      Switching Printer Modes (Dual Simplex/Duplex)
        Switching from Duplex to Dual Simplex Mode
        Switching from Dual Simplex to Duplex Mode
      Switching Print Resolution
    Working With Forms
      Loading Forms (Simplex or Dual Simplex Mode)
      Loading Forms (Duplex Mode)
      Splicing Forms
      Threading and Aligning Forms
        Forms Are Loaded Through Both Printers
        Forms Are Not Loaded In Printer 2
        Forms Are Broken Between the Printers
      Threading the Buffer/Flipper Unit
        Straight Line Configuration
        Left Angle Configuration
      Adjusting the Print Position
      Using the NPRO and NPRO Page Functions to Advance Forms
        NPRO Procedure
        NPRO Page Procedure
        Pre/Postprocessing Nonprocess Runout (NPRO)
      Checking for a Front-Facing Page
      Checking the Forms Alignment
      Checking Print Quality
      Changing the Forms-Based Printer Adjustments
      Adjusting the Stacker Table Height
      Unloading the Stacker
      Using the Printer Stacker with a Postprocessing Device
      Verifying Synchronized Duplex Printing
        Enabling Verification Checking
        Disabling Verification Checking
        Recovery Procedures
    Taking Care of Problems
      Responding to Messages
        Program Check Messages
        Printer Error Messages
        Out Of Supplies Messages
        Intervention Required Messages
        Status Messages
      Forms Jams
        Forms Jam is Visible
        Forms Jam is Not Visible
        Stacker Forms Jam
        Jam Between Printer 1 and Printer 2
        Jams Between the Printer and a Postprocessing Device
        Forms Jam In the Postprocessing Device
      Clearing the Forms Path
        Transfer Station Area
        Fuser and Stacker Areas
        Stacker and Pendulum Area
      Recovering from a Forms Jam
      Preventing Jams
      Running Traces
      Print Quality Problems
      Sudden Failures
      Problem Solving Tips and Suggested Actions
    Maintaining the Printer
      Supplies
      IBM Supplies Worksheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-Replaceable Supply Items
        Warranty Returns
      Storing Supplies
      Cleaning the Printer
      Adding Fuser Oil
      Changing the Toner Cartridge
      Checking the Toner Collector
      Changing the Toner Collector
      Changing the Developer Mix
      Checking the Fine Filter
      Changing the Fine Filter
      Cleaning the Oil Belt
      Changing the Oil Belt
      Checking the Oil Pan
      Adding Supplies to Pre/Postprocessing Devices
    Configuring the System
      Configuring the Printer
        Changing the Language of Messages
        The Configuration Procedure
        Printer Configuration Information
        Configuring Remote Access
      Configuring Host Attachments
        Parallel Channel Configuration Information
        ESCON Channel Configuration Information
        Token ring TCP/IP Attachment Information
        Ethernet TCP/IP Attachment Information
        FDDI TCP/IP Attachment Information
      Configuring Preprocessing/Postprocessing Devices/Interfaces
        Pre/Postprocessor Configuration Values
      Configuration Work Sheets
        Duplex Configuration Work Sheet
        Simplex Configuration Work Sheet
      Defining Forms
        Setting/Adjusting the Contrast
        Setting/Adjusting the Preheat Platen Temperature
        Setting/Adjusting the Hot Roll Temperature
        Setting/Adjusting the Oil Rate
        Setting/Adjusting the Oil Belt Speed
        Setting/Adjusting the Paper Weight
        Form Identification Work Sheet
    Figures
      Tables
      Safety
      Summary of Changes
      Appendix A. Valid Form Lengths in Inches
      Glossary
      Index
    Appendix B. Physical System Layouts
      Simplex Models
      Duplex Models
    Appendix C. Special Features
      Move Mark Forms
      Mark Perforation on Perfless Paper
      Long Forms
    Notices
      Trademarks
      Communication Statements
  4000/4100 with Enhanced Operator Console planning and configuration tasks
    About this Publication
    Terms
    Infoprint 4000 and Infoprint 4100 Advanced Function Printers Library
    Related Publications
    Summary of Changes
    Introduction
      Printer Characteristics
      System Characteristics
        Infoprint 4000 Models ISx
        Infoprint 4000 Models IDx
        Infoprint 4000 Models IRx
        Infoprint 4100 Models
      Simplex Printers
        Components
        Printing Methods
        Configuration for a Simplex Printing System
      Duplex Systems
        Duplex System Printing Methods
          Duplex Printing
          Simplex and Dual Simplex Printing
        Components
          Printer 1
          Printer 2
          Complete duplex printing system
            Buffer/Flipper Unit
            Urge Unit
          Preprocessing/Postprocessing Interfaces
      Inline Configuration for Any Machine Type or Model
      Left-Angle Configuration for Any Machine Type or Model
      'H' Configuration for the Infoprint 4000
      'H' Configuration for the Infoprint 4100 Models PD1/2 and HD1/2
      'H' Configuration for Infoprint 4100 Models HD3/4
      Left-Angle Configuration for Dual Simplex Printing
      Basic Page-Printing Concepts
        Combining Text with Images
        Orienting Text and Images on a Page
          Portrait Orientation
          Landscape Orientation
          Normal and Tumble Duplex
        Advanced Function Image and Graphics
        Multiple-up Printing
          Basic N-up Page Positioning
          Enhanced N-up Page Positioning
          Cut Sheet Emulation
          Options for Multiple-up Printing
        Using Stored Information
      TrueType/OpenType Fonts and Unicode print data
      Enhanced Toner Loading
      IBM Infoprint 4161 Model 005 Multiple Printer Controller
      IBM Infoprint 4161 Model 006 Multiple Printer Controller
      Optional Features
        Attachments
        Function/Performance Enhancements for AFCCU with Microcode Version 11.x and Earlier
        Function/Performance Enhancements for AFCCU with Microcode Version 12.0 and Later
        Enhanced Operator Console
        Infoprint Operator Control
        Buffer/Flipper Units
        Signature Page
        Forms Identification (Barcode)
        Additional Pre/Postprocessing Interface
        Advanced Function Postprocessing Interface
        Customer Changeable Developer
        Additional Customer Changeable Developers
        Developer Cart
        Mark Perforations on Perfless Paper
        Move Mark Forms
        Infoprint Fidelity Manager (Inline Densitometer)
        Infoprint Low Resolution Books
        Infoprint Forms Management System
        Enhanced Printing Adaptor Kit
        Magnetic Ink Character Recognition (MICR) CCD
        Infoprint 4000/4100 Productivity Tracking Feature
        Internal Stacker
        CCD with Blue, Green, or Red Toners
        Commercial Print Support
    Specifications
      Printing Speed
      Print Material
      Print Quality
      Print Quality Enhancement
      Simulating Color with Gray Printing
      Printer Resolution
        240/300 Switchable Printers (Infoprint 4000 Models Only)
        480/600 Switchable Resolution
        IPDS Resolution (600 DPI Only)
          240 DPI and 300 DPI IPDS Resolution Mode
          600 DPI IPDS Resolution Mode
          Automatic IPDS Resolution Mode
        Font Smoothing Mode (480 and 600 DPI Only)
        AFP Resource Resolution
      Forms Handling
      Splicing Station
      Print Area
      Touchscreen
      Power Control
        Duplex Models
        Simplex Models
      Software Requirements
        Print on Demand
        IPDS Mode (Production Print Mode)
        Application Environment
      Host System Attachment Choices
        System/370 Channel Attachment
        Enterprise Systems Connection (ESCON) Channel Attachment
        System/390 Fiber Connection (FICON) Channel Attachment (Infoprint 4100)
        Local Area Network (LAN) Attachments
        FDDI Attachment
        Gigabit Ethernet Attachment
      Preprocessing and Postprocessing Device Interfaces
        Universal printer pre- and postprocessing interface (UP3I)
          Universal Printer Pre- and Postprocessing Interface UP3I (FC 4730)
          System requirements
          PPFA UP3I support
          Conduit support for UP3i
      Reliability, Availability, and Serviceability
      Data Security
      Resident Fonts
      Magnetic ink character recognition (MICR) CCD
        Using the Infoprint 4000/4100 to print MICR documents
        Setting up the printer for printing with MICR toner
        MICR fonts
        MICR format requirements
          Amount field, Positions 1-12
          On-us field, positions 14-31
          Transit field, positions 33-43
          External process control field, position 44 (optional)
          Auxiliary on-us field, positions 45-65 (optional)
        MICR quality control
          Quality control tools
        MICR quality and format verification
          Sampling frequency
          Vertical registration
          Horizontal registration
          Clear band area
          Voids
      Using highlight color with the Infoprint 4000 and Infoprint 4100
        Prerequisites
        Aligning the printhead
        Considering print registration
        Planning the application
          Designing the document
          Example of highlight color application: OUTBACK
        Application considerations
          Page synchronization
            Duplex Side 1/2 Verification
            Program-controlled synchronization verification
          System software support differences
        Threading the printer (side 1 to side 1)
          Straight line configuration (side 1 to side side 1)
          Left angle configuration (side 1 to side 1)
          H-configuration (side 1 to side 1)
    Organizing the Planning Team
      Planning Coordinator
      Physical Planner
      System and Application Programmers
      Operator
      Implementation Plan
        Fifteen Weeks Before Delivery
        Ten Weeks Before Delivery
        Eight Weeks Before Delivery
        Six Weeks Before Delivery
        Four Weeks Before Delivery
        Arrival of the Printer
    Preparing the Processing Environment
      Channel and Local Area Network Attachments
        System/370 Channel Attachment
        ESCON Channel Attachment
           ESCON Multiple Host Environment
        FICON Channel Attachment ( Infoprint 4100)
        Token Ring TCP/IP Local Area Network
        Ethernet TCP/IP Local Area Network
        Gigabit Ethernet SX (fiber) TCP/IP Local Area Network
        Gigabit Ethernet TX (copper) TCP/IP Local Area Network
        FDDI Local Area Network
        Attachment cable features
          Selecting a cable feature
        Performance Considerations
          System/370 Attachment
           ESCON Attachment
          FICON Attachment
      Direct-Attach
      Advanced Function Presentation Licensed Programs
        IBM Advanced Function Presentation Software
        Optical Character Recognition and Bar Code Applications
          BCOCA Support
          Document Composition Facility (Programnbsp;5748-XX9)
          Bar Codes and Optical Character Recognition Fonts (Programnbsp;5688-021)
        Installing and Verifying
        Conversion
    Preparing the Physical Environment
      Environmental Requirements
      Environmental Impact
        Heat/Power
        Sound
      Physical Requirements
        Normal Precautions to Prevent Fire
        Power Requirements
          Power Outlet and Cable Summary
          Power - Print engine
          Power - Printer control unit (Infoprint 4100 HS2 and HD3/4 only)
          Power - Air Bearing Buffer/Flipper Unit
          Physical installation power and grounding recommendations
            Power recommendations
            Grounding recommendations
            Auxiliary power source recommendations
        Additional electrical requirements
        Interface point requirements for low frequency phenomena
        Print Engine Power Cable and Receptacle
          U.S. and Canada
          All Other Countries
        Vacuum Cleaner
        CE Toolkit
      Space Requirements
        Duplex Systems
          Inline Configuration for All Infoprint 4000 Models with the Short Buffer/Flipper Unit
          Inline Configuration for All Infoprint 4000 Models with the Tall Buffer/Flipper Unit
          Left-Angle Configuration for All Infoprint 4000 Models with the Tall Buffer/Flipper Unit
          'H' Configuration for All Infoprint 4000 Models with the Tall or Short Buffer/Flipper Unit (both printers facing the same direction)
          Inline Configuration for Infoprint 4100 Models PD1/2 and HD1/2 with the Tall Buffer/Flipper Unit
          Inline Configuration for All Infoprint 4100 Models with the Air Bearing Buffer/Flipper Unit
          Left-Angle Configuration for Infoprint 4100 Models PD1/2 and HD1/2 with the Tall Buffer/Flipper Unit
          Left-Angle Configuration for Infoprint 4100 Models HD3/4 with the Tall Buffer/Flipper Unit
        'H' Configuration for All Infoprint 4100 Models with the Tall Buffer/Flipper Unit (both printers facing the same direction)
        Simplex Systems
          Infoprint 4000 Models
          Infoprint 4100 Models
        Systems with the Dual Inline Densitometer
        Physical Layout
        Shipping Notes
      Physical Dimensions
      Physical Attachment Requirements
      Installation Requirements
    Selecting and Testing Forms
      Continuous Forms
        Stacking Forms
      Special-Purpose Materials
        Preprinted Forms
      Storing Print Materials
      Testing Forms and Applications
      Valid Form Lengths in Inches
      Form Lengths Not Supported with the Signature Page Feature (Infoprint 4000 Models Only)
    Setting Printer Definition Values
      Changing the Language of Messages
      Defining the Printer
        Printer Definition Information
      Defining the Host Attachments
      Defining Interfaces and Preprocessing or Postprocessing Devices
        Options for Duplex Models
        Options for Simplex Models
      Defining Remote Access
    Establishing Form Settings
    Creating a Snapshot
    Appendix A. Obtaining Supplies
      Supplies
      IBM Supplies Work Sheet
        Infoprint 4000 Supplies Work Sheet
        Infoprint 4100 Supplies Work Sheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-replaceable Supply Items
        Warranty Returns
      Storing Supplies
    Appendix B. Work Sheets
      Installation Planning Work Sheet
      Physical Planning Work Sheet
      Duplex Definition Work Sheet
      Simplex Definition Work Sheet
      Snapshots Work Sheet
    Appendix C. Standard Power Plug Listings
    Notices
      Trademarks
      Product Recycling and Disposal
      Communication Statements
    Glossary
    Index
  4000/4100 with Enhanced Operator Console operator tasks
    About this book
    Terminology
    Notation conventions
    Publications guide
    Safety
    Introducing the printer
      Functional areas
        About forms and forms path
        About the control unit area
          About the operator alert assembly
          About the operator alert lights on the Infoprint 4100 Models HS2 and HD3/4
          About the touchscreen
          About the mouse
          About the keyboard
          About the diskette drive
          About the power control panel
        About the printer operator panel
          About the display
          About the function keys
          About the indicators
        About the developer
        About the forms input area and transfer station area
        About the printer control panel
        About the splicing table
        About the transfer station control lever and tractor control knob
        About the vacuum, stack height, and puller controls
        About the fuser entry area
        About the stacker area
          About the stacker control panel
        About the rear service area
    Operator's overview
      Operator responsibilities
      Normal operation (Ready status)
      Operator intervention (Not Ready status)
      Service call procedure
    Using the touchscreen
      The Enhanced Operator Console
      Tabs, buttons, and panels
      Adjusting the touchscreen
        User controls
        On-screen-display controls
        Problem resolution
    Operating the printer
      Controlling the system power
        Local/remote power control
        Powering on the system
          In host-controlled remote mode
          In local controlled mode
        Powering off the system
          In host-controlled remote mode
          In local controlled mode
          Emergency power off
      Shutting down and restarting the system
        Shutting down the system
        Restarting the system
      Configuring the printer
        Configuring remote access
        Configuring e-mail traces
        Configuring attachments
      Enabling and disabling attachments
        Remote channel enable/disable
        Local channel enable/disable
          Enabling a host attachment
          Disabling a host attachment
      Enabling and disabling pre/postprocessors
      Configuring pre/postprocessors
      Canceling a job
      Authorization levels
        Changing access levels and passwords
      Managing and defining new users
      Loading configuration from diskette
      Adjusting the volume of the operator alert assembly
      Connecting an accessory to the operator alert contacts
      Reporting printer usage
      Switching printer modes (dual simplex/duplex) and printer speed
        Switching from duplex to dual simplex mode
        Switching from dual simplex to duplex mode
        Switching printer speeds
    Working with forms
      Snapshots
        Viewing Snapshots
        Sorting and searching Snapshots
        Loading a Snapshot
        Saving changes to Snapshots
        Saving a new Snapshot
        Deleting a Snapshot
        Restoring Snapshot settings from diskette
      Loading forms--auto load (dual simplex mode)
        At the touchscreen or the printer operator panel
        At the printer forms input area
        At the touchscreen
        At the stacker control panel
        At the printer control panel (tractored forms)
        At the printer control panel (tractorless forms or no Auto Load controls)
        At the printer
        At the touchscreen or the printer control panel
      Loading forms--auto load (duplex mode)
      Loading forms without manual reload--auto load (duplex mode)
        Feeding new forms through the printer
        Adjusting the printer for new forms
        Loading the correct forms settings
      Loading forms--semiautomatic load (dual simplex mode)
      Checking the tension arm
      Adjusting the upper and lower tension arm springs on the Infoprint 4000
      Adjusting the lower tension arm spring for the Infoprint 4100
      Splicing forms on the Infoprint 4000
      Splicing forms on the Infoprint 4100
        Splicing tractorless forms
      Aligning tractored forms
        Forms loaded through both printers
        Forms are not loaded in Printer 2
        Forms are broken between the printers
      Aligning tractorless forms
      Threading the Buffer/Flipper Unit (duplex)
        Straight line configuration
        Left angle configuration
        H-configuration
      Setting print registration
      Using the NPRO function to advance forms
        NPRO procedure
        NPRO Advance One Page procedure
      Checking for a front-facing page
      Checking forms alignment
      Checking print quality
        Engine print balancing procedure
          Balancing print contrast between Printer 1 and Printer 2
          Balancing print boldness between Printer 1 and Printer 2
      Unloading the stacker
      Using the printer stacker with a postprocessor
      Verifying synchronized duplex printing
    Taking care of problems
      Responding to messages
        Operator message codes
        Intervention messages
        0133 Skew error
        0119 Upper tractor forms jam
        079A, 0131, 0132 Tension errors
        D720 Verification mark position incorrect
        0134 Fuser wrap
        0093 Input loop paper jam
        0161 Stacker jams
        Hard program checks
        Status messages
          Status message summary
      Forms jams
        Forms jam is visible
        Forms jam is not visible
        Stacker forms jam
        Transfer station area forms jam
        Upper fuser forms jam
        Stacker pendulum forms jam
        Forms jam between Printer 1 and Printer 2
        Jams between the printer and a postprocessing device
        Forms jam in the postprocessing device
      Clearing the forms path
        Transfer Station area
        Fuser area and Stacker area
        Stacker and Pendulum area
      Recovering from a forms jam
      Suggestions for preventing jams
      Running traces
      Print quality problems
      Sudden failures
      Problem solving tips and suggested actions
    Maintaining the printer
      Cleaning the printer
        Developer area
        Forms input area
        Transfer station area
        Stacker area
        Buffer/Flipper unit
        Rear service area
      Adding fuser oil
      Adding toner
      Adding toner bottles (Infoprint 4000)
      Adding a toner cartridge (Infoprint 4100)
      Checking the toner collector
      Changing the toner collector
      Changing the developer mix
      Checking the fine filter
      Changing the fine filter
      Cleaning the oiler belt
      Changing the oiler belt
      Checking the absorbent pad in the oil pan
      Adding supplies
      Obtaining supplies
    Appendix. Features
      Move Mark Forms Feature (RPQ 8B3964)
      Mark Perforation on Perfless Paper Feature (RPQ 8B3965)
      Enabling long forms
      Signature Page Feature (FC 8B4053)
      No forms size error checking
      Changing the Customer Changeable Developer (CCD)
        Removing the developer
        Installing the developer
      Magnetic ink character recognition (MICR) CCD
        Using the Infoprint 4000/4100 to print MICR documents
        Setting up the printer for printing with MICR toner
        MICR fonts
        MICR format requirements
          Amount field, Positions 1-12
          On-us field, positions 14-31
          Transit field, positions 33-43
          External process control field, position 44 (optional)
          Auxiliary on-us field, positions 45-65 (optional)
        MICR quality control
          Quality control tools
        MICR quality and format verification
          Sampling frequency
          Vertical registration
          Horizontal registration
          Clear band area
          Voids
      Inline Densitometer for High Resolution Printers Feature (FC 4832)
        Threading the densitometer unit
          Adjusting the upper tension arm spring
        Adjusting print density
      Inline Densitometer for Low Resolution Printers Feature (FC 4833)
        Threading the densitometer unit
        Adjusting print density
          Measuring density
      Forms Identification (Barcode) Feature (FC 4464)
        Defining a form barcode
        Loading pre-printed barcode forms
          Barcode Structure
          Hexadecimal Values
          Barcode Size and Placement
        Cleaning the Forms Barcode Sensor
        Problem resolution
          Disabling Form Barcode Checking
      Stacker Basket Feature (FC 4775)
      Using highlight color with the Infoprint 4000 and Infoprint 4100
        Prerequisites
        Aligning the printhead
        Considering print registration
        Planning the application
          Designing the document
          Example of highlight color application: OUTBACK
        Application considerations
          Page synchronization
            Duplex Side 1/2 Verification
            Program-controlled synchronization verification
          System software support differences
        Threading the printer (side 1 to side 1)
          Straight line configuration (side 1 to side side 1)
          Left angle configuration (side 1 to side 1)
          H-configuration (side 1 to side 1)
      Universal Printer Pre- and Postprocessing Interface (UP3I) (FC 4730)
      Adjusting the paper guides for lightweight paper
      Infoprint Manager Operations for AIX on the Enhanced Operator Console Feature (FC 4560)
        Enabling the TCP/IP attachment
        Using the Infoprint Manager Operations GUI from the printer console
      Preheat Platen Teflon Mat (RPQ 8B5023)
        Installing the teflon mat and wear strip
        Removing the teflon mat and wear strip assembly
    Notices
      Trademarks
      Product Recycling and Disposal
      Communication Statements
    Glossary
    Index
  4100 with InfoPrint Controller Planning and Configuration Guide
    Preface
      About this Publication
      Terms
      InfoPrint 4100 Models MS1, HS2, HS3, MD1/2, HD3/4, HD5/6, TS1, TS2, TD1/2, and TD3/4 Advanced Function Printers Library
      Related Publications
    Introduction
      Printer Characteristics
      System Characteristics
        InfoPrint 4100 Models
      Simplex Printers
        Components
        Printing Methods
        Configuration for a Simplex Printing System
      Duplex Systems
        Duplex System Printing Methods
          Duplex Printing
          Dual Simplex Printing
        Components
          Printer 1
          Printer 2
          Complete duplex printing system
            Web Cooling System
            Air Bearing Flipper and Tall Buffer/Flipper Unit
            Paper Paths and Feature Codes
          Preprocessing/Postprocessing Interfaces
      Inline Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 with Web Cooling System
      Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
      H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 with Web Cooling System
      Left-Angle Configuration for Dual Simplex Printing without Web Cooling System
      Inline Configuration for InfoPrint 4100 Models MD1/2 or TD1/2 without Web Cooling System
      Inline Configuration for InfoPrint 4100 Models HD3/4 or TD3/4 without Web Cooling System
      Inline Configuration for InfoPrint 4100 Models HD5/6 without Web Cooling System
      Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 without Web Cooling System
      H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2, and TD3/4 without Web Cooling System
      Basic Page-Printing Concepts
        Combining Text with Images
        Orienting Text and Images on a Page
          Portrait Orientation
          Landscape Orientation
          Normal and Tumble Duplex
        Advanced Function Image and Graphics
        Multiple-up Printing
          Basic N-up Page Positioning
          Enhanced N-up Page Positioning
          Cut Sheet Emulation
          Options for Multiple-up Printing
        Using Stored Information
      TrueType/OpenType Fonts and Unicode print data
      Enhanced Toner Loading
      Magnetic Ink Character Recognition (MICR) CCD
        Magnetic ink character recognition (MICR)
          Using the InfoPrint 4100 to print MICR documents
          Setting up the printer for printing with MICR toner
          MICR fonts
          MICR format requirements
            Amount field, Positions 1-12
            On-us field, positions 14-31
            Transit field, positions 33-43
            External process control field, position 44 (optional)
            Auxiliary on-us field, positions 45-65 (optional)
          MICR quality control
            Quality control tools
          MICR quality and format verification
            Sampling frequency
            Vertical registration
            Horizontal registration
            Clear band area
            Voids
      Customer Changeable Developer
      Additional Customer Changeable Developers
      Developer Cart
    Specifications
      Printing Speed
      Print Material
      Print Quality
      Print Quality Enhancement
      AFP Color Emulation Feature (FC 4850 or 4851)
      Simulating Color with Gray Printing
      Printer Resolution
        480/600 Switchable Resolution
        IPDS Resolution (600 dpi Only)
          240 dpi and 300 dpi IPDS Resolution Mode
          600 dpi IPDS Resolution Mode
          Automatic IPDS Resolution Mode
        Font Smoothing Mode (480 and 600 dpi Only)
        AFP Resource Resolution
      Forms Handling
      Splicing Station
      Print Area
      Touch panel
      Power Control
        Duplex Models
        Simplex Models
      Software Requirements
        IPDS Print on Demand (POD)
        IPDS Production Print
        Application Environment
      Host System Adapter Choices
        Gigabit Ethernet Adapter
        System/390 Fiber Connection (FICON) Channel Adapter
        Enterprise Systems Connection (ESCON) Channel Adapter
      Preprocessing and Postprocessing Device Interfaces
        Universal printer pre- and postprocessing interface (UP3I)
          Universal Printer Pre- and Postprocessing Interface UP3I
          System requirements
          PPFA UP3I support
          Conduit support for UP3i
      Reliability, Availability, and Serviceability
      Data Security
      Resident Fonts
    Organizing the Planning Team
      Planning Coordinator
      Physical Planner
      System and Application Programmers
      Operator
      Implementation Plan
        Fifteen Weeks Before Delivery
        Ten Weeks Before Delivery
        Eight Weeks Before Delivery
        Six Weeks Before Delivery
        Four Weeks Before Delivery
        Arrival of the Printer
    Preparing the Processing Environment
      Network Adapters
        Gigabit Ethernet SX (fiber) TCP/IP Local Area Network
        Gigabit Ethernet TX (copper) TCP/IP Local Area Network
        FICON Channel Adapter
        ESCON Channel Adapter
        Multiple Host Environment
      Adapter cable features
        Selecting a cable feature
      Performance Considerations
      SNMP Remote Access
      Advanced Function Presentation Licensed Programs
        InfoPrint Advanced Function Presentation Software
        Optical Character Recognition and Bar Code Applications
          BCOCA Support
          Page Printer Formatting Aid (Program 5688-190)
        Installing and Verifying
        Conversion
    Preparing the Physical Environment
      Environmental Requirements
        Normal Precautions to Prevent Fire
        Vacuum Cleaner
      Physical Requirements
        Power Requirements
          Power Outlet and Cable Summary
          Print Engine Power Cable and Receptacle
            All Countries Except the U.S.A. and Canada (All Models)
            U.S.A. and Canada (Models MS1, HS2, MD1/2, HD3/4, TS1, and TD1/2)
            U.S.A. and Canada (Models HS3, HD5/6, TS2, and TD3/4)
          Physical installation Power and Grounding Recommendations
            Power recommendations
            Grounding recommendations
            Auxiliary power source recommendations
            Additional electrical requirements for 50Hz 400 V installations
            Interface point Requirements for low frequency phenomena
          Common Electrical Requirements
      Environmental Impact
        Heat Dissipation, Power, and Acoustics (Models MS1, MD1/2, TS1, and TD1/2)
        Heat Dissipation, Power, and Acoustics (Models HS2 and HD3/4)
        Heat Dissipation, Power, and Acoustics (Models HS3 and HD5/6)
        Heat Dissipation, Power, and Acoustics (Models TS2 and TD3/4)
      Space Requirements
        Duplex Systems
          Inline Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
          Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
          H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 with Web Cooling System
          Inline Configuration for InfoPrint 4100 Models MD1/2 or TD1/2 without Web Cooling System
          Inline Configuration for InfoPrint 4100 Models HD3/4 or TD3/4 without Web Cooling System
          Inline Configuration for InfoPrint 4100 Model HD5/6 without Web Cooling System
          Left-Angle Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 without Web Cooling System
          H Configuration for InfoPrint 4100 Models MD1/2, HD3/4, HD5/6, TD1/2 and TD3/4 without Web Cooling System
        Simplex Systems
          InfoPrint 4100 Models
        Physical Layout
        Shipping Notes
      Physical Dimensions
      Physical Attachment Requirements
      Installation Requirements
    Selecting and Testing Forms
      Continuous Forms
        Stacking Forms
      Special-Purpose Materials
        Preprinted Forms
      Storing Print Materials
      Testing Forms and Applications
      Valid Form Lengths in Inches
    Setting Printer Definition Values
      Changing the Language of Messages
      Changing Access Levels and Passwords
        Managing and Defining New Users
      Defining the Printer
        Configuring the Printer
        Printer Definition Information
      Defining Adapters
        Configuring Adapters
      Defining Protocols
        Configuring Protocols
      Defining Remote Access
        Configuring Remote Access for SNMP
        Configuring Remote Access for Online Access (Web Pages)
        Configuring Remote Access for E-mail
        Configuring Remote Access for PRSCD (Printer Reported Service and Configuration Data)
        Configuring Remote Access to Host using Telnet 3270
        Configuring Remote Access to Host using Telnet 5250
        Configuring Remote Access to InfoPrint Process Director (IPPD) on the Host
      Troubleshooting LAN Connectivity and LAN Communication Problems
      Defining Interfaces and Preprocessing or Postprocessing Devices
        Options for Simplex and Duplex Models
    Establishing Form Settings
    Creating and Copying Snapshots
      Creating and saving Snapshots
      Editing multiple Snapshots
      Saving Print Quality Settings to a Snapshot
      Understanding Print Quality
      Copying Snapshots between InfoPrint Controllers
      Copying Snapshots from the AFCCU to the InfoPrint Controller
    Appendix A. Obtaining Supplies
      Supplies
      Supplies Work Sheet
        InfoPrint 4100 Models MS1, MD1/2, TS1, and TD1/2 Supplies Work Sheet
        InfoPrint 4100 Models HS2 and HD3/4 Supplies Work Sheet
        InfoPrint 4100 Models TS2 and TD3/4 Supplies Work Sheet
        InfoPrint 4100 Models HS3 and HD5/6 Supplies Work Sheet
      Ordering Supplies
        Maintenance Supply Items
        Customer-replaceable Supply Items
        Warranty Returns
      Storing Supplies
    Appendix B. Work Sheets
      Installation Planning Work Sheet
      Physical Planning Work Sheet
      Duplex Definition Work Sheet
      Simplex Definition Work Sheet
      Snapshots Work Sheet
    Appendix C. Standard Power Plug Listings
    Notices
      Product recycling and disposal
      Trademarks
      Communication statements
    Glossary
    Index
  4100 with POWER Controller Operator's Guide
    Figures
    Tables
    Safety
    Preface
      About this book
      Terminology
      Notation conventions
      Publications guide
    Introducing the printer
      Functional areas
        About forms and forms path
        About the control unit area
          About the operator alert assembly
          About the operator alert lights
          About the touch panel
          About the mouse
          About the keyboard and USB flash memory device
          About the power control panel
        About the printer operator panel
          About the display area on the printer operator panel
          About the function keys
          About the indicators
        About the developer
        About the forms input area and transfer station area
        About the printer control panel
        About the splicing table
        About the transfer station
        About the vacuum, stack height, and puller controls
        About the fuser entry area
        About the forms exit area
          About the stacker control panel
        About the rear service area
        About the power control panel
          About the local and remote power controls
      Operator console
        The Main touch panel
        Tabs on the Main touch panel
        Buttons on the Main touch panel
        Areas on the Main touch panel
        User controls
        On-screen-display (OSD) controls
    Operator's overview
      Operator Responsibilities
      Normal operation (Ready status)
      Operator intervention (Not Ready status)
      Service call procedure
    Operating the printer
      About the power control panel
      About the local and remote power controls
      Powering on the system
        Powering on the system in local-controlled mode
      Powering off the system
        Powering off in local-controlled mode
        Powering off the system using the Unit Emergency switch
      Shutting down and restarting the system
        Shutting down the system
        Restarting the system
      Enabling and disabling protocols
      Enabling and disabling pre/postprocessors
      Canceling a job
      Adjusting the volume of the operator alert assembly
      Adjusting the touch panel
      Reporting printer usage
      Switching printer modes and printer speed
        Switching from Duplex to Dual Simplex mode
        Switching from Dual Simplex to Duplex mode
        Switching printer speeds
    Working with Snapshots
      Viewing Snapshots
      Sorting and searching Snapshots
      Loading Snapshots
      Creating Snapshots
      Changing values in Snapshots
      Saving changed Snapshots
      Deleting Snapshots
      Restoring Snapshots
    Working with forms
      Loading forms
        Choosing a load procedure
        Paper paths
        Removing forms
        Loading tractored roll-feed forms
          Threading the forms
          Aligning the forms on the tractor pins
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Checking alignment of tractored forms
          Starting the printer
        Loading tractored fan-fold forms
          Positioning boxed fan-fold forms in the forms input area
          Threading the forms
          Aligning the forms on the tractor pins
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Checking alignment of tractored forms
          Starting the printer
        Loading tractorless roll-feed forms
          Threading forms
          Adjusting the tractorless feeding unit
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Starting the printer
        Loading special forms
          Positioning boxed fan-fold forms in the forms input area
          Adjusting the tractorless feeding unit
          Changing forms settings on Printer 1
          Loading forms using the Forms Feed button
          Checking alignment of tractored forms
          Setting print registration
          Starting the printer
          Setting the forms length for Auto Load
          Starting the Auto Load sequence
        Switching between tractored and tractorless forms
          Feeding new forms through the printer
          Adjusting the printer for new forms
          Loading the correct forms settings
        Adjusting the rear paper-edge guide and Dual Toner Mark/Side Verify Sensor
        Checking the tension arm
        Splicing tractored forms
        Aligning tractored forms
          Aligning forms in both printers
          Aligning forms with no forms in Printer 2
          Aligning forms when forms are broken between printers
        Aligning tractorless forms
        Threading a duplex system
          Threading a duplex system in a straight-line (inline) configuration
          Threading a duplex system in a left-angle configuration
          Threading a duplex system in an H configuration
        Setting printer resolution
        Setting print registration
        Setting printer registration
        Non-Process Runout (NPRO)
        Advancing forms using NPRO
        Advancing one page using NPRO
        Checking for front-facing pages
        Checking forms alignment
        Checking print quality
          Saving Print Quality Settings to a Snapshot
          Engine print balancing procedures
            Balancing print contrast between Printer 1 and Printer 2
            Balancing print boldness between Printer 1 and Printer 2
      Unloading the stacker
      Using the printer stacker with a postprocessor
      Verifying synchronzied duplex printing for tractored forms
      Special marks
        Using side verify marks
        Using registration marks for tractorless printing
        Using registration marks for top of form
        Using registration marks for UP3I synchronization
        Creating user-defined registration marks
    Taking care of problems
      Responding to messages
        Operator message codes
        Intervention messages
          0133 Skew error
          0119 Upper tractor forms jam
          079A, 0131, 0132 Tension errors
          D720 Verification mark position incorrect
          0134 Fuser wrap
          0093 Input loop paper jam
          0161 Stacker jams
        Hard program checks
        Status messages
      Clearing forms jams
        Clearing a forms jam when the jam is visible
        Clearing a forms jam when the jam is not visible
        Clearing a forms jam in the Stacker
        Clearing a forms jams in the Transfer Station, the Upper Fuser, or the Forms Exit area
        Clearing a forms jam between Printer 1 and Printer 2
        Clearing a forms jam between the printer and a postprocessing device
        Clearing a forms jam in a postprocessing device
      Clearing the forms path
        Clearing the forms path in the Transfer Station area
        Clearing the forms path in the Fuser area
        Clearing the forms path in the Stacker and Pendulum areas
      Recovering from a forms jam
      Suggestions for preventing jams
      Traces
        Saving traces to USB flash memory devices
        E-mailing traces
        Archiving traces to the hard drive
      Print quality problems
      Sudden failures
        Problem solving tips
    Cleaning and Servicing the printer
      Cleaning the developer area
      Cleaning the customer-replaceable corona wires and developer area
      Cleaning the forms input area
      Cleaning the transfer station area
      Cleaning the stacker area
      Cleaning the buffer/flipper unit
      Cleaning the rear service area
      Adding fuser oil
      Adding a toner cartridge
      Checking the toner collector
      Changing the toner waste collector bag
      Changing the developer mix
      Checking the fine filter
      Changing the fine filter
      Cleaning the oiler belt
      Changing the oiler belt
      Checking the absorbent pad in the oil pan
      Replacing the customer-replaceable corona wires
      Adding supplies
    Help topics for the InfoPrint POWER Controller operator console
      Using the help system
      Main touch panel
      Logon window
        Manage Users window
      Frequent Tasks panels
        Snapshot panel
        Manage Protocols panel
        Cancel Current Job panel
        Clear IPDS Buffers panel
        Pre/Postprocessors panel
        Activity Entry window (with Feature Code 4565)
        InfoPrint Manager panel (with Feature Code 4560)
      Forms panels
        Form Settings panel
          Marks window
        Special Marks panel
          Special Marks - Edit window
        Align Forms panel
        Print Registration panel
        Advance Paper (NPRO) panel
        Front Facing panel
      Maintenance panels
        Print Samples panel
        Touch Panel panel
        Backup and Recovery panel
        Traces panel
          Trace Archive window
           Configure Control Unit Trace window (Service only)
        Diagnostic panels (Service only)
           Diagnostics - Adapter panel (Service only)
          Diagnostics - Mechanism panel (Service only)
          Diagnostics - Pre/Postprocessors panel (Service only)
          Diagnostics - Print Quality Mode panel (Service only)
        Logs panel (Service only)
           Preventative Maintenance panel (Service only)
          Error Log panel (Service only)
      Printer Definition panels
        Print Quality panel
           Beam Adjustments window (Service only)
          Print Quality Enhancement window (Service only)
        Printer panels
          Printer - Basic panel
          Printer - Setup panel
          Printer - Date/Time panel
          Printer - Service panel (Service only)
          Printer - Resource Utilization panel (Service only)
          Printer - Version panel
        Printer Definition Language (PDL) panels
          PDL - IPDS panel
        Network panels
          Network - Attachments panel
          Network - Adapters window
          Network - Remote Access panel
             Remote Access - SNMP panel
             Remote Access - Online Access panel
            Remote Access - E-mail panel
             Remote Access - PRSCD panel
          Network - Restricted Access panel
          Network - Status panel
        Pre/Postprocessors panels
          Pre/Postprocessing panel
          Postprocessing Options panel
          UP3i Devices panel
        Features panel
    Help topics for the InfoPrint 4100 Online Access Web Pages
      InfoPrint 4100 Online Access Web Pages
      Login page
      Status page
      Details page
      Network page
      Snapshot page
      Snapshots Editor page
      Preventive Maintenance Log page
      Error Log page (Service only)
      Login History page
      Traces page
      Microcode Update page (Service only)
      Version page
    Features
      Using the Move Mark Forms feature (RPQ 8B3964)
      Using the Side 2 Verify Disable feature (RPQ 8B4282)
      Using the Dual Toner Mark/Side Verify Sensor (FC 4570/9570)
        Using the Dual Toner Mark/Side Verify sensor in Duplex mode
        Using the Dual Toner Mark/Side Verify sensor for same side printing
      Using the Signature Page feature (FC 4553)
      Using the Forms Size Check feature (RPQ 8B4027)
      8.0" Forms Width Support feature (RPQ 8B5045)
      Productivity Tracking Feature (FC 4565)
      Using the MICR feature (FC 4481 and 9471) for InfoPrint Models HS2, HS3, HD3/4, and HD5/6
      Changing the Customer Changeable Developer (CCD)
        Removing the Customer Changeable Developer
        Installing the Customer Changeable Developer
      Using the Stacker Basket Extension (FC 4775) feature
      Forms Identification (Bar Code) feature (FC 4464)
        Adding or changing a form bar code for an existing Snapshot
        Defining a form bar code for a new Snapshot
        Loading preprinted bar code forms
        Cleaning the forms bar code sensor
        Disabling Form Bar Code checking
        Problem resolution when using preprinted bar code forms
      Using the Universal Printer Pre- and Postprocessing Interface (UP3I) (FC 4740)
      InfoPrint Manager Operations for AIX feature (FC 4560) on the InfoPrint POWER Controller Operator Console
        Enabling the IPDS TCP protocol for the IPM feature
        Using the InfoPrint Manager Operations feature
      Using the Commercial Print Support (FC 4940)
        Installing and removing the PTFE Mat and PTFE wear strips
          Installing the PTFE mat and wear strip
          Removing the PTFE mat and wear strip assembly
      Enabling Feature Codes and RPQs
      Disabling Feature Codes and RPQs
      Uninstalling Feature Codes and RPQs
    Notices
      Trademarks
      Product recycling and disposal
      Communication statements
    Glossary
    Index
InfoPrint ProcessDirector for AIX
  Planning and Installing
    About this publication
    New in this release
    Overview of InfoPrint ProcessDirector
      Components
        Features
        Application server
        Extensions
      Compatible products
      System configurations
      InfoPrint ProcessDirector publications
        Accessing the publications CD on AIX
        Accessing the publications CD on Windows
    Planning for installation
      Hardware requirements
        Primary computer
        Secondary computers
        Application server computers
        Other hardware requirements
      Planning for file systems
        File systems for the primary computer
        File systems for AIX Secondary Server features
        File systems for Linux Secondary Server features
      Creating system groups and users
      Secure Sockets Layer support
      Installing required software
        Installing an operating system
          Installing the AIX operating system
          Installing the SLES 10.0 operating system
          Installing the Red Hat Linux 5.4 operating system
          Installing a Windows operating system
        Installing DB2
          Installing the InfoPrint ProcessDirector version of DB2
          Installing your own copy of DB2 on the primary computer
          Installing and configuring your own copy of DB2 on a different computer
        Installing ActivePerl
        Installing a Web browser
          Configuring Mozilla
          Configuring Mozilla Firefox
          Configuring Internet Explorer
          Making the Adobe Reader available to the Web browser
      Planning for optional software
        Job submission
        Data transforms
          Preparing to install Transform features
        InfoPrint Manager for AIX
        Fonts
        Formatting changes
    Upgrading to Version 2.1 or later
      Upgrading on the same computer
      Upgrading on a different computer
      Upgrading a manual failover environment
      Upgrading to Version 2.3
      Completing the upgrade process
    Installing InfoPrint ProcessDirector
      Preparing the primary computer for installation
      Installing from a staging location
      Installing the base product
      Installing a manual failover environment
        Preparing the failover IP address and external storage system
        Installing manual failover computers
        Adding a backup computer for manual failover
      Installing in a high availability environment
      Troubleshooting installation errors
    Installing Application servers and Secondary Server features
      Preparing the primary computer
        Installing and configuring a Network Information Service (NIS) server
      Installing on Linux systems
      Installing on AIX systems
      Preparing a Windows XP application server
        Installing Windows Services for UNIX (SFU)
        Configuring User Name Mapping on Windows
        Testing the connection to the NFS server
      Preparing a Windows 7 application server
      Installing application servers on Windows computers
    Installing feature or extension software
      Installing the Advanced Transform license file on your primary computer
      Installing Transform features
        Logging in to the Transform feature user interface
    Completing post-installation tasks
      Logging in for the first time
      Verifying the installation
      Deleting temporary installer files
      Configuring InfoPrint ProcessDirector
      Enabling Secure Sockets Layer
      Scheduling automatic maintenance
      Replacing your control files with the sample files
      Copying objects from another system
      Installing and configuring the pdpr script
    Starting, stopping, and uninstalling InfoPrint ProcessDirector on AIX
      Starting the base product and secondary servers on AIX
        Deactivating the autostart script on AIX
        Activating the autostart script on AIX
        Starting and stopping the base product when the DB2 server is on a different computer
      Starting secondary servers on Linux
        Deactivating the autostart script on Linux
        Activating the autostart script on Linux
      Starting an application server
      Moving processing to and from a backup computer
      Stopping the base product and secondary servers on AIX
      Stopping secondary servers on Linux
      Stopping an application server
      Uninstalling InfoPrint ProcessDirector
        Uninstalling the base product, features, and extensions from the primary computer
        Uninstalling features or extensions
        Uninstalling Secondary Server features from AIX or Linux computers
        Uninstalling an application server
    Backing up data and applying service
      Backing up and restoring InfoPrint ProcessDirector data
        Backing up data
        Restoring data
      Applying service to a DB2 server on a different computer
    Installation planning checklist
    Accessibility
    Notices
      Trademarks
    Glossary
  Using InfoPrint ProcessDirector
    Overview
      InfoPrint ProcessDirector
        Product overview
          System objects
            Primary server
            Secondary servers
            Application servers
            Workflows and job types
            Step templates and steps
            Input devices
            Bar code formats
            Documents
            Command Center servers
            Inserter controllers
            Printers
            Service policies
              SLA deadline
              Checkpoints
              Checkpoint intervals
              Checkpoint times
              No-service periods
              Time zones
              Checkpoint status
            No-service periods
            Expected work
            Document database
            Media objects
            System user and group
            Users and groups
            Locations
            Report templates and reports
            Log
          Input file formats
          Output formats
          Job submission methods
          Jobs with JDF job tickets
          Processing phases
          Properties
          Web services in InfoPrint ProcessDirector
            Usage notes
            Notation and conventions for Web service descriptions
          Features
            WPM Connect
            InfoPrint Visual Workbench
              InfoPrint Visual Workbench user interface
              InfoPrint Visual Workbench control files
              AFP Indexer
                Page groups
                Supplemental pages
                Index tags
              Whitespace Manager
                White space
                Content
              AFP Editor
                Bar codes
                Text strings
                Hidden areas
            Inserter overview
              Inserter control files
              Inserter results files
              Inserter completion methods
              Inserter reconciliation methods
              Inserter reprint methods
            Ultimate Impostrip Connect
            Service Level Agreements
            Designer
            Manufacturing Optimization
              Terms
              Usage scenarios
                Usage scenario concepts
                Sorting (one-to-one) job scenario
                Splitting (one-to-many) job scenario
            Advanced Transform feature
            Ink Estimation
            Reports
            PitStop Connect
            Command Center overview
          Extensions
        InfoPrint ProcessDirector user interface
          Banner
          Main page
            System Summary portlet
            Command Center portlet
            Documents portlet
            Input Devices portlet
            Printers portlet
            Jobs portlet
          Administration page
          Preferences page
          Reports page
          Inserter Reconcile Job page
          Inserter Controllers portlet
      Color and grayscale printing using AFP
        InfoPrint Color Solutions
        Color printing concepts
          Color spaces and ICC profiles
          Gamut and rendering intent
          Color mixing and calibration
          Halftones and Tone Transfer Curves
          File size
        Grayscale printing concepts
        Color Management
          ICC Profiles
          Rendering intents
          Paper characteristics
        AFP color management
          Color Management Resources
            Types of CMRs
              Color Conversion
              Link Color Conversion
              Halftone
              Tone Transfer Curve
            Processing modes
              Audit
              Instruction
              Link
            CMR creation and installation
          Data Objects
            Types of data objects
            Data object creation and installation
          Resource library management
          Tips and best practices
            Images
            Resources
        InfoPrint color and grayscale products
          Printers
            InfoPrint 5000
            InfoPrint 4100
            InfoPrint 1000 series
          InfoPrint AFP Resource Installer
          Print servers
            InfoPrint Manager
              PPFA
            InfoPrint ProcessDirector
        AFP color solution scenarios
          Using halftones on your InfoPrint 4100
          Replacing preprinted forms
          Eliminating physical inserts
        Related publications
      Notices
        Trademarks
        Terms and conditions
    Installing
      Installing InfoPrint ProcessDirector
        Verifying your installation
        Installing the pdpr script
        Installing Application servers and secondary server features
          Preparing the primary computer
            Installing and configuring the NIS server
          On Linux servers
          On AIX servers
          On Windows XP
            Installing Windows Services for UNIX (SFU) on Windows
            Configuring User Name Mapping on Windows
            Testing the connection to the NFS server
          On Windows 7
          Installing Application Servers on Windows computers
        Installing features or extensions
        Putting the Advanced Transform license file on your primary computer
        Installing the Transform Features
        Logging in to the Transform Feature user interface
    Migrating
      Migrating
        Moving to InfoPrint ProcessDirector from InfoPrint Manager
        Moving to the InfoPrint ProcessDirector Transform Features from InfoPrint Transform Manager
        Moving to the InfoPrint ProcessDirector Transform Features from the InfoPrint Manager transforms
    Configuring
      Configuring the system
        Setting system properties
        Preparing for job submission
          Configuring Download for z/OS
          Configuring to use AFP Download Plus
          Configuring to use the LPD protocol
          Configuring to use the pdpr command
          Preparing for FTP or SCP clients
          Configuring to use JDF job tickets
            Locating print files
            Using a mapping file to find input files
            Setting job properties from the JDF job ticket
          Preparing to submit batch jobs
            Batching methods
              Batch
              JDF
              List
              None
              Number
              Pages
              Pattern
              Time
              Overrides files
              List files
        Defining input devices
          Using supplied input devices
          Copying input devices
          Creating input devices
          Setting up Hot folder input devices to process batch jobs
          Defining input devices for use with Transforms
        Defining printer devices
          Defining AFP printer devices
          Defining Passthrough printer devices
          Defining PCLOut printer devices
        Configuring the system to use inserters
          Configuring mapped network drives
          Configuring inserter controllers
            Configuring inserter controllers to communicate with InfoPrint ProcessDirector
            Configuring inserter controllers to write results files
          Creating rules for inserter control files
          Creating rules for inserter results files
          Using scripts to send inserter control files and receive results files
          Defining inserter controller objects
            Using supplied inserter controllers
            Creating inserter controllers
            Associating inserter controllers with jobs
          Creating bar code formats
          Configuring job types for insertion
          Defining a job type to print jobs created in the Documents table
          Customizing inserter document properties
          Enhancing AFP files for insertion
            Identifying documents for insertion
            Creating bar codes for insertion
            Configuring banner pages for insertion
        Creating bar code formats
        Setting up a Command Center
          Setting the system name
          Adding Command Center servers
          Setting up a Command Center shared directory
          Updating the overrides configuration file for moving jobs in a Command Center
          Defining a job type to process jobs moved from another system
        Defining media objects
          Using supplied media objects
          Copying media objects
          Creating media objects
        Defining locations
          Creating locations
          Copying locations
        Preparing to use job types
          Defining job types
          Copying step templates
          Tuning step templates
          Assigning job types
          Associating service policies with job types
          Replacing your control files with the sample files
          Holding jobs before printing
          External steps that run external programs
            Setting up external programs
            Setting up step templates for external steps
              External steps that use the command line or control files
              External steps that use hot folders
            Setting up job types for external steps
            Testing external step processing
          Adding references to medium maps in non-standard AFP files
          Defining a job type with preview printing
          Defining a job type that sends jobs to InfoPrint Transforms
          Configuring job types for insertion
          Defining a job type to process jobs moved from another system
          Defining a job type to print jobs created in the Documents table
          Defining job types or printers that use a color mapping table
          Defining a job type to print non-AFP data to a PCLOut printer.
            Processing concerns when using PCLOut printers
          Job types for non-AFP jobs
            Defining a job type to copy to a printer hot folder
            Defining a job type to print non-AFP data to a Passthrough printer
            Printng PDF and PostScirpt files on the InfoPrint 5000 printer Models AS1 and AD1/2
              Verifying bos.cifs_fs fileset is installed
              Defining a job type to submit a file to an InfoPrint 5000 hot folder
              Connecting to the InfoPrint 5000 hot folder
          Grouping child jobs
          Adding steps to fill white space in AFP files
          Adding steps to index AFP files
          Configuring steps to identify documents in AFP files
        Copying objects from another system
        Applying custom values
        AFP resources in InfoPrint ProcessDirector
          Identifying AFP resource directories to InfoPrint ProcessDirector
          Search order for AFP resource extensions
          Job properties and AFP form definitions
          Color mapping table source and output files
            Parts of a color mapping table
              Using source groups
              Using target groups
            Creating a color mapping table
        Banner pages
          Banner pages for AFP printers
            Setting up printers to print banner pages
            Updating the banner_page_property_values.cfg file
            Updating the banner_page_code_page_mapping.cfg file
            Obtaining and using coded fonts for Japanese banner pages
            Changing the appearance of banner pages
            Printing bar codes on banner pages
          Banner pages for Passthrough printers
            Setting up Passthrough printers to print banner pages
            Setting up a job type to print PDF banner pages
            Formatting changes
        Configuring control files for job audit information
        Setting up user exit programs
        Configuring to send jobs to Impostrip OnDemand Digital Automation
        Setting up datastream transforms
          Transforming line data to AFP
            Configuring a line data transform step
            Configuring to use inline resources with line data jobs
          Configuring for the InfoPrint ProcessDirector Transform features
          Configuring for the Advanced Transform features
          Configuring for InfoPrint Transform Manager
          Configuring for InfoPrint Manager transforms
        Configuring to work with PrintNet T
          Setting up step templates to send jobs to PrintNet T
          Defining a job type to send jobs to PrintNet T
        Configuring to work with Manufacturing Optimization
          Editing the sample document properties template file
          Creating step templates and job types
            Creating a job type to split jobs by size
              Adding steps for insertion
            Creating a job type to split jobs by document property
            Adding references to medium maps in non-standard AFP files
          Creating the Enhance AFP control file
          Setting a maximum for document search results
        Setting up security
          Defining user names
            Adding a user
            Copying a user
            Giving a user system user authority
          Defining security groups
            Security groups that InfoPrint ProcessDirector provides
            Copying a group
            Updating properties of a group
          Enabling SSL
          Setting a password expiration counter
        Instructing new users about logging in
          Configuring Internet Explorer
          Configuring Mozilla
          Configuring Mozilla Firefox
        Setting up service policies
          Using supplied service policies
          Creating service policies
          Copying service policies
          Associating service policies with job types
        Setting up no-service periods
          Using supplied no-service periods
          Creating no-service periods
        Defining expected work
        Customizing the user interface
          Changing the layout of the Main page
          Displaying an alternate system name
          Displaying your favorite objects
          Displaying objects in additional locations
          Displaying objects in selected locations
          Filtering the Jobs table
          Filtering the Job Types table
          Changing table columns
          Changing the automatic refresh interval
          Removing or displaying the print progress bar
        Changing the job information shown on the printer console
        Upgrading to InfoPrint ProcessDirector Version 2.1
        Upgrading to Version 2.3
      Using InfoPrint Visual Workbench to enhance AFP files
        Starting and stopping InfoPrint Visual Workbench
        Displaying sample AFP files
        Creating and updating InfoPrint Visual Workbench control files
        Identifying AFP resource directories
        Enabling object selection in sample AFP files
        Showing page information in sample AFP files
        Mapping fonts for AFP files
          Using font-mapping files to map fonts
          Creating font mappings from text blocks
          Modifying font mappings from text blocks
          Changing the default code page encoding
        Specifying a form definition
        Adding content to white space in AFP files
          Creating definitions for known white space
          Creating definitions by searching for white space
          Modifying or deleting white space definitions
            Modifying known white space definitions
            Modifying white space defined from a search
            Deleting white space definitions
       &n